FOWLER

Product DescriptionThe FOWLER 52-440-612-0 is a dial-type bevel protractor designed for precise angle measurement in machining, fabrication, and layout work. It reads a full 360 degrees with a dial graduation of 0-90-0 and delivers accuracy to 5 minutes of arc. The satin chrome finish...

Product Description The FOWLER 52-450-010-0 is a bevel protractor designed for precise angle measurement in trade and industrial applications. It measures angles from 0 to 180 degrees with 1-degree blade graduation, providing reliable readings for layout, fabrication, and inspection work. The head is rectangular...

Product Description The FOWLER 52-460-005HELIO is an adjustable planer and shaper gage designed for precision setup and measurement in woodworking and machining environments. The gage features a base that measures 5 inches long, 3/4 inch wide, and 6-1/4 inches high, providing a stable reference...

Product Description The FOWLER 52-465-005-0 is a parallel clamp designed for precision workholding applications in machine shops, toolrooms, and metrology setups. It features a squeeze clamping action that applies even, parallel pressure across the jaw faces, reducing the risk of part movement or distortion...

Product Description The FOWLER 52-465-015-0 is a parallel clamp designed for precision workholding in inspection, metrology, and machining setups. It uses a squeeze clamping action to hold workpieces with consistent parallel jaw alignment, reducing the risk of part movement during measurement or light machining...

Product Description The FOWLER 52-470-006-0 is a 6-piece telescoping gage set designed for measuring inside diameters, bores, and slots. Each gage features a spring-loaded plunger that locks at the measured dimension, allowing the technician to transfer the reading to a micrometer or caliper for...

Product DescriptionThe FOWLER 52-470-007-0 is a six-piece telescoping gage set designed for measuring internal bore diameters, cylinder bores, and hole sizes across a range of 5/16 inch to 6 inches. Each gage features a spring-loaded plunger that locks at the measured dimension, allowing the...

Product DescriptionThe FOWLER 52-475-015-1 is a matched set of two hardened steel V-blocks designed for precision workholding and inspection tasks in machine shops and metrology environments. Each block features a 90-degree V-groove that accepts cylindrical workpieces from 0.15 inches minimum to 1.5 inches maximum...

Product Description The FOWLER 52-475-050-0 is a hardened steel V-block designed for precision workholding applications in machine shops, tool rooms, and inspection environments. The block features a 90-degree V-angle and holds round stock from 0.150 inches minimum up to 1.3125 inches maximum diameter. Accuracy...

Product Description The FOWLER 52-475-500-0 is a matched 2-block V-block set designed for precision workholding and inspection tasks in machine shops, tool rooms, and metrology environments. Each block features a 4-way V configuration with a 90-degree V angle, accepting round stock from 1 inch...

Product Description The FOWLER 52-475-555-0 is a matched pair of steel V-blocks designed for precision workholding in layout, inspection, and machining setups. Each block features a 90-degree V-angle and accepts round workpieces up to 2 inches in diameter. The set ships with two clamps...

Product DescriptionThe FOWLER 52-485-006-0 is a 26-leaf feeler gage set used to measure small gaps, clearances, and tolerances in mechanical assemblies. Each leaf is made from tempered steel and cut to a flat, tapered profile. The set spans from 0.0015 inches to 0.0250 inches...

Product Description The FOWLER 52-500-050-0 is a retractable pocket scriber with a carbide point tip, designed for marking and scribing lines on metal, plastic, and other hard surfaces. At 6.5 inches overall length, it fits comfortably in a shirt or apron pocket and deploys...

Product Description The FOWLER 52-500-055-0 is a carbide replacement point designed for use with scribers in layout and marking applications. Scribers are used by machinists, fabricators, and trade professionals to score precise lines on metal, plastic, and other hard surfaces during layout work. The...

Product Description The FOWLER 52-520-109-0 is a dial drop indicator designed for precise linear measurement in machining, inspection, and quality control applications. It features a 1 inch total range with 0.001 inch graduations and a continuous 0-100 dial reading, giving technicians clear, direct readout...

Product Description The FOWLER 52-520-110-0 is a dial drop indicator designed for precise linear measurement in inspection, machining, and quality control applications. It offers a 1 inch total measurement range with 0.001 inch graduations and a 0-100 dial reading scale, allowing technicians to detect...

Product Description The FOWLER 52-520-110-2 is a dial drop indicator designed for precise linear measurement in machining, metrology, and quality control applications. It delivers a 1-inch total measurement range with a graduation of 0.001 inches per division, allowing technicians to detect surface variation, runout,...

Product DescriptionThe FOWLER 52-520-129-0 is a dial drop indicator designed for precise dimensional measurement in machining, inspection, and metrology applications. It features a 1-inch total measurement range with a balanced 0-25-0 dial reading and a fine graduation of 0.0005 inches per division, allowing accurate...

Product Description The FOWLER 52-520-450-0 is a dial drop indicator designed for precise linear measurement in inspection, machining, and quality control applications. It covers a measurement range of 0 to 1 inch with a graduation of 0.001 inches and an accuracy of 0.001 inches,...

Product DescriptionThe FOWLER 52-562-001-0 is a horizontal-style dial test indicator designed for precision measurement in machining, inspection, and metrology applications. It features a jeweled bearing movement and a 1.5-inch diameter white dial with a 0-15-0 reading scale, providing a full measurement range of 0.06...