stanley

Product Description The STANLEY 15-828A is a high-speed hacksaw blade designed for cutting metal, conduit, pipe, and other hard materials in trade and industrial applications. Measuring 12 inches in length with an 18 teeth-per-inch (TPI) tooth configuration, it delivers controlled, medium-speed cuts suited for...

Product Description The STANLEY 15-904A is a 10-inch carbon steel hacksaw blade rated at 24 teeth per inch (TPI), sold in a pack of two. Designed for hand hacksaw frames, this blade features a toothed cutting edge and a flexible construction that resists breakage...

Product Description The STANLEY 15-908A is a 10-inch carbon steel hand hacksaw blade designed for cutting metal, conduit, pipe, and similar materials in the field or shop. It features 18 teeth per inch (TPI), making it well suited for medium-wall tubing and general-purpose metal...

Product DescriptionThe STANLEY 15-908A is a steel hacksaw blade designed for cutting mild steel, cast iron, aluminum, and copper. At 10 inches in length with an 18 teeth-per-inch (TPI) count, this blade delivers controlled, medium-pitch cuts suited for general metal fabrication and pipe work....

Product DescriptionThe STANLEY 15-922A Hacksaw Blade is suitable for cutting various metals. This blade measures twelve inches in length and has thirty-two teeth per inch. This product comes in a pack of two blades. Cuts mild steel Cuts cast iron Cuts aluminum and copper...

Product DescriptionThe STANLEY 15-924A is a 12-inch hacksaw blade rated at 24 teeth per inch (TPI), designed for cutting mild steel, cast iron, aluminum, and copper. The higher TPI count produces cleaner cuts on thinner-walled materials and non-ferrous metals. At 0.09 pounds, it is...

Product Description The STANLEY 15-924A is a 12-inch carbon steel hacksaw blade rated at 24 teeth per inch (TPI), designed for hand hacksaw frames used in cutting pipe, conduit, and metal stock in the field or shop. The toothed cutting edge delivers controlled, fine...

Product Description The STANLEY 15-928A is a 12-inch carbon steel hacksaw blade designed for hand hacksaw frames used in cutting pipe, conduit, metal strapping, and similar materials in trade and maintenance applications. Running 18 teeth per inch (TPI), this blade produces a medium-fine cut...

Product Description The STANLEY 16-150 is a 3-piece short blade wood chisel set designed for woodworking tasks that require controlled cuts in tight spaces. The set features impact-resistant handles engineered to resist deformation under mallet strikes, making them suitable for both bench work and...

Product DescriptionThe STANLEY 16-227 is a 1/4-inch center punch designed for accurately marking drill-start points on metal, wood, and other hard surfaces. Machined from tempered steel, the punch delivers consistent impact resistance and holds a sharp point through repeated use. At 4 inches overall...

Product Description The STANLEY 16-227 is a 1/4-inch center punch designed for marking drill start points on metal, wood, and other workable materials. The punch creates a precise indentation that guides drill bits and prevents walking on hard surfaces. At 0.18 pounds, it is...

Product Description The STANLEY 16-228 is a center punch designed for marking drill start points on metal, wood, and other hard surfaces before boring. The punch body is machined from tempered steel, providing the hardness needed to withstand repeated hammer strikes without deforming the...

Product DescriptionThe STANLEY 16-228 is a 5/16-inch center punch designed for marking drill start points on metal, wood, and other hard surfaces. Center punches create a small indentation that seats a drill bit at the intended location, preventing bit walk during the start of...

Product Description The STANLEY 16-233 is a pin punch designed for driving pins, roll pins, and fasteners from mechanical assemblies during service and repair work. Built from tempered steel, it delivers the hardness and toughness needed to withstand repeated hammer strikes without deforming the...

Product Description The STANLEY 16-233 is a 3/16-inch pin punch designed for driving roll pins, drift pins, and tapered pins out of assemblies during mechanical disassembly and maintenance work. Pin punches of this type transmit direct impact force from a hammer to a pin...

Product Description The STANLEY 16-236 is a prick punch designed for marking center points on metal, wood, and other workpieces before drilling or scribing. Built from tempered steel, it delivers the hardness and edge retention needed for repeated impact use. The punch measures 3/8...

Product DescriptionThe Stanley 16-236 Prick Punch features a three-eighths inch steel tip. It has an overall length of five and one-half inches. This punch is designed for marking or guiding holes in various materials. One-piece forged steel construction provides durability. Size marking on the...