seal-tite

Product DescriptionThe SEAL-TITE 10506 is a round duct starting collar designed to create a branch take-off from a plenum or main trunk line to round pipe or flexible duct. The collar measures 6 inches in diameter and features an uncrimped end, allowing direct connection...

Product Description The SEAL-TITE 106012 is a round galvanized metal tee joint designed for use in residential and light commercial HVAC duct systems. Constructed from 24-gauge galvanized metal, this tee fitting connects three sections of 12-inch round ductwork in a standard tee configuration. It...

Product DescriptionThe SEAL-TITE 106243 is a round duct reducer designed to transition airflow from a 4-inch round duct to a 3-inch round duct in sheet metal duct systems. This fitting is used in forced-air HVAC systems where duct runs must step down in diameter...

Product Description The SEAL-TITE 107413X20X36 is a plenum side panel used in forced-air HVAC duct systems. Plenum sides form the structural walls of supply or return plenum boxes, connecting the air handler or furnace to the main duct trunk. This panel measures 13 inches...

Product DescriptionThe SEAL-TITE 1110248 is a sheet metal end cap sized at 24 x 8 inches, designed to terminate or seal the open end of rectangular HVAC ductwork. End caps of this type are used to close off duct runs that are no longer...

Product DescriptionThe SEAL-TITE 115012 is a round duct starting collar designed to create a branch take-off connection from a plenum or main trunk line to round pipe or flex duct. The extended long-body design provides deeper insertion into the mating duct, resulting in a...

Product DescriptionThe SEAL-TITE 115014 is a round duct starting collar designed to create a 14-inch branch connection from a supply or return trunk duct. Installed into a field-cut opening in the trunk, it forms a secure take-off point for round rigid pipe or flexible...

Product DescriptionThe SEAL-TITE 1170-081208 is a straight register boot designed for residential and light commercial HVAC duct systems. This fitting connects rectangular ductwork to a floor, wall, or ceiling register opening, directing conditioned air into the occupied space. The boot measures 8 inches by...

Product DescriptionThe SEAL-TITE 1203-3010 is a transition take off fitting designed for HVAC duct distribution systems. It connects a main trunk duct to a branch run, redirecting conditioned airflow from the supply plenum or trunk line into a lateral duct. This type of fitting...

Product DescriptionThe SEAL-TITE 1210-1010 is a duct end cap sized at 10 inches x 10 inches, designed to close off the open end of a rectangular duct section. End caps are used to terminate duct runs cleanly, preventing airflow loss and blocking unconditioned air,...

Product DescriptionThe SEAL-TITE 1210-1210 is a duct end cap sized at 12 inches by 10 inches, designed to close off the open ends of rectangular sheet metal ductwork. End caps of this type prevent uncontrolled airflow loss at duct terminations, keeping conditioned air where...

Product DescriptionThe SEAL-TITE 1210-1410 is a duct end cap sized at 14 inches by 10 inches, designed to close off the open ends of rectangular sheet metal ductwork. End caps are used to terminate duct runs and prevent air bypass at dead-end sections of...

Product DescriptionThe SEAL-TITE 1210-1610 is a rectangular duct end cap designed to close off the open end of a flat-oval or rectangular duct section measuring 16 inches by 10 inches. It provides a secure, airtight termination point that prevents conditioned air loss and blocks...

Product DescriptionThe SEAL-TITE 1210-1612 is a duct head end cap designed to terminate or seal the open end of a rectangular duct section measuring 16 inches by 12 inches. End caps of this type are used to close off unused duct openings, cap branch...

Product DescriptionThe SEAL-TITE 1210-1810 is an 18 x 10 inch duct end cap designed to close off the open ends of rectangular ductwork. End caps are used to terminate duct runs, seal unused duct openings, and maintain system pressure integrity in forced-air HVAC installations....

Product Description The SEAL-TITE 1210-1812 is a duct heat end cap sized at 18 by 12 inches, designed to terminate rectangular duct runs in forced-air HVAC systems. End caps close off the open end of a duct section, preventing conditioned air from bypassing the...

Product DescriptionThe SEAL-TITE 1210-2414 is a duct head end cap sized at 24 inches by 14 inches, used to close off the open end of a rectangular duct run. End caps of this type terminate a duct section cleanly, preventing air bypass and maintaining...

Product Description The SEAL-TITE 1240-1810 is a rectangular short way duct elbow fabricated from 26-gauge galvanized metal, sized at 18 inches by 10 inches. It is designed for use in low-pressure supply and return air distribution systems and connects rectangular duct runs at 90-degree...

Product Description The SEAL-TITE 1245-1810 is a rectangular shortway duct elbow fabricated from 26-gauge galvanized metal, designed for directional changes in low-pressure HVAC duct systems. Measuring 18 inches by 10 inches, this fitting redirects airflow along the short dimension of the duct — the...

Product Description The SEAL-TITE 1278-24-041005 is a straight register boot designed for basement and ceiling duct termination applications in residential and light commercial HVAC systems. This boot connects a 4 inch by 10 inch rectangular duct opening to a floor, ceiling, or wall register...