SOUTHLAND

Product Description Southland 565-1200FG is a 1 in. x 10 ft. galvanized carbon steel threaded pipe intended for potable water and drain applications. The pipe is Schedule 40 with a 1.049 in inside diameter, 1.315 in outside diameter, and 0.133 in wall thickness; both...

Product DescriptionThe Southland A203643 kit includes an internal filter designed for pre-filtration purposes. This component is essential for maintaining the efficiency of lawn and garden equipment. Proper filtration helps in preventing dirt and debris from damaging the machinery. Compatible with various lawn and garden...

Product DescriptionThe Southland 20502 is a 3/4 inch by 2 inch Schedule 40 steel black iron nipple. It is designed for use in various plumbing applications, including water and gas lines. This steel nipple is durable and provides reliable connections between pipes. 3/4 inch...

Product Description The SOUTHLAND 510-304HP is a 3/4 inch 90-degree galvanized steel street elbow fitting designed for use in plumbing, compressed air, and drainage applications. Street elbows feature one male-threaded end and one female-threaded end, allowing direct connection to a fitting without requiring an...

Product Description The SOUTHLAND 8511-104R is a 3/4-inch by 10-foot section of EMT (electrical metallic tubing) used for the protection and routing of wire conductors in electrical installations. Manufactured from high-grade low-carbon steel, the tubing provides the ductility needed for field bending without splitting,...

Product Description The SOUTHLAND 521-954HN is a black hex bushing designed to connect two pipes of different diameters in a threaded piping system. Hex bushings are a compact, reliable solution for reducing from a larger female thread to a smaller male thread without the...

Product Description The SOUTHLAND 584-040DB is a black-coated welded steel pipe nipple sized at 3/4 inch diameter by 4 inches in length. It is manufactured to Schedule 40 wall thickness with standard NPT threads on both ends. The black coating provides a rust-inhibiting surface...

Product Description The SOUTHLAND 586-020DB is a black-coated welded steel pipe nipple designed for threaded pipe assemblies in plumbing, gas, and mechanical systems. The black coating provides corrosion resistance for standard service conditions. Manufactured to ASTM A53 specifications and threaded to Schedule 40 standard...

Product Description Southland 587-1200 is a 1-1/2 in by 10 ft carbon steel threaded pipe intended for standard threaded connections in plumbing, mechanical, and building applications. The pipe is Schedule 40 with a 0.145 in wall thickness and is threaded on both ends with...

Product Description Southland 563-1200FG is a 1/2 in x 10 ft carbon steel Schedule 40 galvanized threaded pipe designed for residential potable water and drainage applications. The pipe has a galvanized (zinc) coating for corrosion resistance and both ends are threaded with plastic thread...

Product Description The Southland 511-343HN is a galvanized reducing pipe coupling that joins a 3/4-inch pipe to a 1/2-inch pipe. It uses female iron pipe (FIP) threaded connections and features a galvanized malleable iron construction for internal rust protection. The fitting is rated for...

Product Description Southland 521-986HC is a hexagon reducing bushing that adapts a 2 in connection to 1-1/4 in using threaded fittings. The single-piece bushing has a hexagonal exterior for wrench tightening and is intended for hydraulic and plumbing coupling applications. The component is compact...

Product Description Southland 10303 is a welded steel pipe nipple sized 3/8 in x 2-1/2 in with NPT threads and a galvanized finish. It provides a threaded connection for standard NPT pipe fittings and is intended for plumbing and industrial pipe runs. Schedule 40...

Product Description Southland 520-305HN is a 1 in malleable iron 90 deg street elbow with FPT x MPT threaded connections for plumbing and black pipe systems. The fitting connects with standard NPT nipples and is intended for 1 in nominal pipe. It is specified...

Product Description Southland 511-951HC is a galvanized steel hexagon bushing that reduces a 1-inch pipe connection to 1/4 inch. It provides a MIP (male iron pipe) to FIP (female iron pipe) threaded connection and the hexagon shape allows wrench installation. Sold individually, the fitting...

Product Description The Southland 511-931HP is a galvanized malleable iron hex bushing sized 1/2 in x 1/4 in, designed to connect pipes of different diameters. It provides a zinc-coated corrosion-resistant surface, meets NSF-61 low-lead requirements, and connects with NPT nipples and pipe of matching...

Product Description The Southland 511-321HC is a galvanized reducing coupling that connects threaded components from 3/8 inch to 1/4 inch. Constructed of iron with a galvanized finish, the fitting measures approximately 1 x 1 x 1.5 inches and weighs about 1.76 ounces. It features...

Product Description Southland 10305 is a welded steel galvanized nipple sized 3/8 in. x 3-1/2 in. The fitting provides corrosion-resistant exterior protection and features NPT male pipe threads for standard pipe connections. It is manufactured by Mueller B&K under the Southland brand, conforms to...

Product Description Southland 585-360DB is a 1 in. x 36 in. carbon steel Schedule 40 threaded pipe supplied redi-cut with threads and thread protectors on both ends. It has an inside diameter of 1.049 in., outside diameter of 1.315 in., wall thickness of 0.109...

Product Description Southland 510-003HN is a 90-degree pipe elbow with 1/2 in nominal size and female iron pipe (FIP) connection. The fitting is made of malleable iron and is rated for 150 psi; galvanized versions are zinc-coated for water applications and meet low-lead requirements....