SLOAN

Product Description The SLOAN 3375015 is a 24 VAC solenoid operator retrofit kit designed to convert existing hydraulic flushometers into fully electronic flushometers for integration with PWT (Programmed Water Technologies) system controllers. Operating at 24 volts AC across 50/60 Hz, the kit draws 8.4...

Product DescriptionThe SLOAN 3308867 is a genuine OEM control stop cap with extended bumper, also referenced as the H-576, designed for use in commercial flushometer systems. The extended bumper cap assembly fits over the control stop to protect the stop mechanism and provide a...

Product Description The SLOAN 1171019 is a wall-mounted vitreous china urinal fixture with a rear spud connection, designed for commercial and institutional restroom applications. It features a washout flush type and is rated for multiple flush rates including 0.125 GPF, 0.5 GPF, and 1.0...

Product Description The SLOAN 0308802 is a rough brass adjustable tail assembly used in commercial plumbing stop and tail valve arrangements. The H551A tail assembly provides the threaded connection point between a flush valve stop or angle stop and the fixture supply inlet. At...

Product DescriptionThe SLOAN EBV191A is a genuine OEM dual flush push button cover assembly repair kit designed for Sloan ECOS series flush valves used on commercial toilet fixtures. This kit restores the button and cover assembly on ECOS dual-flush valve installations, addressing wear or...

Product DescriptionThe SLOAN 3010055 is a manual flushometer replacement assembly designed for the Sloan Royal series of commercial flush valves. This unit serves as a direct replacement component for Royal flushometers configured at 3.5 gallons per flush (GPF), restoring reliable, hands-operated flushing performance to...

Product Description The SLOAN 0302054PK is a B-6-A replacement socket designed for use in Sloan flushometer valve assemblies. This socket features a 7.75-inch length dimension (LDIM) with a 5.25-inch threaded section and is finished in rough brass for durability in commercial plumbing applications. It...

Product Description The SLOAN 33621024 is a deck-mounted mid body sensor faucet designed for commercial and institutional restroom applications. It operates at a flow rate of 0.35 GPM using a multi laminar spray pattern that delivers a smooth, low-splash stream. An infrared sensor triggers...

Product DescriptionThe SLOAN 0367039 is a replacement Optima control module designed for use without a turbine, intended for Sloan EBF and ETF series sensor faucets. The control box houses the electronics and sensor logic that govern automatic faucet operation, including activation timing, line flush...

Product Description The SLOAN 0325149 is a battery wrench designed for use with Sloan flushometer valves. Also referenced as EBV-119, this tool allows service technicians to remove and install the battery compartment on electronic flushometer units without damaging the valve body or battery housing....

Product Description The SLOAN 3400318 is a concealed sensor urinal flushometer from the Sloan CX product line, designed for commercial restroom applications where touch-free operation and water efficiency are required. The valve body is constructed from semi-red brass and features a graphite (PVD) finish....

Product Description The SLOAN 0308043PK is a chrome plated tail with a ground-joint connection, designed as a genuine OEM replacement component for Sloan NH5 series flush valve assemblies. Ground-joint tails provide a metal-to-metal seal at the spud connection, reducing reliance on gasket compression alone...

Product Description The SLOAN 3782663 is a manual urinal flushometer designed for commercial restroom applications. Operating at 0.5 gallons per flush (GPF), it meets low-consumption water efficiency requirements while delivering reliable, repeatable flush performance. The valve uses a dual-filtered fixed bypass diaphragm design, which...

Product DescriptionThe SLOAN CR1004A is a genuine OEM repair kit designed for closet flushometer valves operating at 1.6 gallons per flush (GPF). This kit restores proper venturi function in Sloan closet flush valves, addressing wear or failure of internal components that regulate flush volume...

Product Description The SLOAN ETF1024A is a vandal-resistant male thread aerator repair kit designed for commercial and institutional faucet applications. The kit delivers a flow rate of 2.2 gallons per minute through an aerated outlet and threads onto the faucet spout using a 15/16...

Product Description The SLOAN 0305148 is a solenoid spanner wrench designed specifically for servicing Sloan solenoid valves. Also identified by the model designation EL-227, this tool provides the correct interface for removing and installing solenoid valve components without damaging the valve body or internal...

Product Description The SLOAN 1001502 is the WES7 T-Bar Cartridge Removal Tool designed specifically for servicing Sloan Waterfree Urinal systems. This hand tool provides the mechanical leverage needed to extract cartridge assemblies cleanly from Sloan waterfree urinal bodies without damaging the housing or cartridge...

Product DescriptionThe SLOAN 3790046 is a battery-powered sensor water closet flushometer designed for hands-free, automatic flushing in commercial restroom applications. Identified by cross-reference model 8115-3.5, this unit delivers 3.5 gallons per flush using a diaphragm valve design. The polished chrome finish suits standard commercial...

Product Description The SLOAN 0309021 is a diverter valve and spray arm assembly designed as a direct OEM replacement for Sloan bedpan washer systems. The assembly combines a chrome-plated diverter valve body with a 12-inch spray arm, delivering the redirected water flow required to...

Product Description The SLOAN 3345091 is a wall plate replacement kit designed for the EL1031A exposed urinal flushometer with a latching sensor. This kit provides the components needed to restore a Sloan sensor-operated urinal valve to proper function when the wall plate or sensor...