Sloan 3400318 Sensor Urinal Flushometer 0.5 Gpf Graphite

Product Description

The SLOAN 3400318 is a concealed sensor urinal flushometer from the Sloan CX product line, designed for commercial restroom applications where touch-free operation and water efficiency are required. The valve body is constructed from semi-red brass and features a graphite (PVD) finish. At 0.5 GPF, it meets low-consumption requirements for urinal fixtures. An infrared sensor with a detection range of 15 inches to 34 inches handles flush actuation without any manual contact. Power is supplied by four AA alkaline batteries, with a hardwired electrical option available as a backup or primary power source. Licensed plumbers install this valve in new construction and retrofit commercial restroom projects.

The 3400318 is intended for commercial urinal installations requiring a concealed flushometer configuration with a rear spud fixture connection. The valve is ADA compliant and supports hands-free operation, making it well suited for high-traffic public restrooms, office buildings, hospitality venues, and institutional facilities. This unit is cross-referenced as CX 8198-0.5-GR and carries a graphite finish designation of GR. It is manufactured in the United States. The 3/4-inch water inlet accommodates standard commercial supply line sizing.

Key Features

• Infrared sensor with 15-inch to 34-inch detection range delivers fully touch-free flush actuation
• Concealed valve body with graphite PVD finish for a low-profile, modern appearance
• 0.5 GPF flow rate supports water conservation requirements in commercial facilities
• Battery-powered operation with hardwired electrical override option for installation flexibility
• Semi-red brass valve body construction for durability in continuous-use commercial environments
• ADA compliant and hands-free, eliminating a primary contact point for germ transmission
• Made in the USA

Compatibility

Designed for use with rear spud urinal fixtures requiring a concealed flushometer valve. Cross-referenced as CX 8198-0.5-GR. Consult Sloan rough-in specifications to confirm spud size and supply connection compatibility before installation.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and the International Plumbing Code (IPC). Shut off the water supply and relieve line pressure before beginning any work on the supply stop or valve body. If using the hardwired power option, electrical connections must comply with NEC requirements and should be completed by a qualified electrician. Do not over-tighten the spud coupling or supply stop connections on the brass valve body.