RAIN BIRD

Product Description The RAIN BIRD A22445 is a subsurface root watering system designed to deliver water and nutrients directly to the root zone of trees and shrubs. At 36 inches in length and rated for 0.50 GPM flow, it bypasses surface evaporation and runoff...

Product DescriptionThe RAIN BIRD Y05100 is a dual-purpose hand tool designed for servicing pop-up rotor sprinkler heads in irrigation systems. One end functions as a rotor screwdriver for adjusting arc and radius settings on compatible rotors, while the other end serves as a pull-up...

Product Description The RAIN BIRD M13011 is a 1-station, 2-wire decoder designed for use in decoder-based irrigation control systems. It connects a single valve or device to a 2-wire communication path, allowing the irrigation controller to send individual commands to each station over a...

Product Description The RAIN BIRD X63020 is a pressure-compensating Xeri-Bug drip emitter designed for low-volume irrigation systems. It delivers a consistent 2 gallons per hour (GPH) output across a range of inlet pressures, making it well-suited for sloped terrain and systems with variable line...

Product Description The RAIN BIRD A16130MX is a pressure-compensating bubbler designed for low-volume drip and bubbler irrigation systems. It delivers a consistent 1.0 gallon per minute (GPM) flow rate regardless of fluctuating line pressure, ensuring uniform water distribution to trees, shrubs, and ground-cover plantings....

Product Description The RAIN BIRD 236239 is a replacement solenoid assembly designed for use with RAIN BIRD irrigation control valves. The solenoid converts electrical signals from an irrigation controller into mechanical valve movement, opening and closing the valve to control water flow through an...

Product DescriptionThe RAIN BIRD 10032812 is a brass adjustable nozzle sized at 3/16 inches, designed for use with RAIN BIRD 35ATNTLESS impact sprinkler heads. This nozzle controls the flow and distribution pattern of water delivered by the sprinkler, making it a direct-replacement component for...

Product Description The RAIN BIRD X49111 is a 16mm subsurface or surface dripline designed for precise, low-volume irrigation in landscaping, agriculture, and turf applications. Emitters are factory-installed at 18-inch spacing and rated at 0.6 gallons per hour, delivering consistent flow along the entire run....

Product Description The RAIN BIRD A46610 is a non-potable snap-on cover designed as a replacement top cap for the 1800-NP series pop-up sprinkler heads used in non-potable water irrigation systems. This cover snaps directly onto the sprinkler body, providing a secure fit without tools....

Product DescriptionThe RAIN BIRD X20000 is a solid cap cover designed to temporarily cap off 1800 Series pop-up spray bodies when a head is no longer needed or a zone is being decommissioned. The cap installs directly onto the spray body in place of...

Product Description The RAIN BIRD Y65550 is a 5000 Plus series shrub rotor sprinkler head equipped with a pressure-compensating (PC) nozzle, a seal-a-matic (SAM) check valve, and a pressure-regulating stem (PRS). These three integrated features work together to reduce misting, prevent low-head drainage, and...

Product DescriptionThe RAIN BIRD A11404 is a standard rectangular replacement lid designed for underground irrigation valve boxes. It provides a secure, weather-resistant cover that protects valve assemblies from soil intrusion, foot traffic, and surface debris. The green color blends with turf and landscaping, keeping...

Product Description The RAIN BIRD A16120MX is a pressure compensating bubbler designed for low-volume drip and flood irrigation applications. It delivers a consistent 0.50 GPM flow rate regardless of fluctuations in line pressure, making it well suited for tree basins, shrub beds, and ground...

Product Description The RAIN BIRD A16110MX is a pressure compensating bubbler designed for low-volume irrigation applications. It delivers a steady 0.25 gallons per minute (GPM) output regardless of fluctuations in system pressure, making it well suited for tree wells, shrub beds, and ground cover...

Product Description The RAIN BIRD A47027 is an MPR (matched precipitation rate) stream bubbler nozzle designed for low-volume, close-range irrigation coverage. It delivers a gentle, stream-based flow pattern across a full 360-degree radius at a 5-foot throw distance, making it suitable for ground cover...

Product Description The RAIN BIRD X33010MX is a 0.25-inch blank distribution tubing sold in a 100-foot roll, designed for use in drip and micro-irrigation systems. Blank tubing serves as the supply line that runs from the mainline to individual emitters, stakes, or micro-spray heads....

Product Description The RAIN BIRD A47029 is an MPR (Matched Precipitation Rate) stream bubbler nozzle designed for low-volume, targeted irrigation applications. It delivers a 90-degree arc pattern with a 5-foot radius, making it well-suited for small planting beds, borders, and tight landscaped areas where...

Product Description The RAIN BIRD A50306MX is a 6-inch pop-up sprinkler body with an integrated 45 psi pressure regulator, designed for use in residential and commercial irrigation systems. The built-in pressure regulator limits outlet pressure to 45 psi, protecting downstream heads from misting, fogging,...

Product DescriptionThe RAIN BIRD X14139 is a replacement cap O-ring designed for use with Rain Bird quick-check valve assemblies. O-rings serve as the primary seal between the cap and valve body, preventing leakage at the service point and maintaining system pressure integrity. This component...