MSA SAFETY

Product Description The MSA 815355 is an organic vapor respirator cartridge designed for use with compatible MSA half-mask and full-facepiece respirators. Classified as a GMA cartridge type and manufactured to NIOSH 42 CFR Part 84 standards, it provides protection against organic vapor hazards encountered...

Product DescriptionThe MSA 10037648 is a full face respirator from the Ultra Elite series, constructed with a Hycar facepiece for chemical resistance and durability in demanding environments. It features a 4-point suspension system for stable, adjustable fit and a threaded filter connection for use...

Product Description The MSA 815363 is an acid gas respirator cartridge rated P100, designed to protect workers from acid gas hazards in industrial and trade environments. Each package contains two cartridges and is part of the MSA Advantage 200 Series system. The P100 filter...

Product DescriptionThe MSA 10034027 is a hard hat designed to protect workers from impact and penetration hazards on job sites. Hard hats of this type serve as primary head protection for personnel working in environments where falling objects, low clearances, or overhead hazards are...

Product Description The MSA 10033653 is a vented bump cap designed to protect workers from minor head impacts and lacerations in low-clearance environments. Constructed from high density polyethylene, it offers lightweight durability suitable for extended wear during a shift. The pinlock adjustment system allows...

Product Description The MSA 463944 is a Class E, Type I hard hat designed for general industrial and construction environments where electrical hazard protection is required. Built from high-density polyethylene, this helmet features a 4-point pinlock suspension system that allows quick, tool-free size adjustment...

Product Description The MSA 477482 is a Type 1, Class E slotted cap-style hard hat built on the V-Gard platform and constructed from high-density polyethylene (HDPE). It provides impact and penetration resistance for workers in electrical, construction, and industrial environments. The ratchet suspension system...

Product Description The MSA 484923 is a respirator hood designed for use with the MSA V-Guard powered air-purifying respirator system. Respirator hoods provide full-head coverage and interface with the blower and filtration assembly to deliver filtered air to the wearer. This hood serves as...

Product Description The MSA 815558 is a V-Gard slotted cap-style hard hat rated Type 1, Class E, built for electrical and general industrial job sites. Constructed from high-density polyethylene, it meets ANSI/ISEA Z89.1-2014 and CSA Z94.1-2005 standards for impact resistance and electrical hazard protection....

Product DescriptionThe MSA 475369-BL7278 is a full brim hard hat from MSA's V-Gard series, designed for impact resistance in industrial and construction environments. Built from high-density polyethylene (HDPE), it meets ANSI/ISEA Z89.1-2014 Type I, Class E requirements, making it suitable for electrical hazard protection...

Product Description The MSA 636060 is a dental burnishing tool designed for use with Self-Contained Breathing Apparatus (SCBA) systems. This specialized hand tool is used by safety equipment technicians to service and maintain SCBA facepiece components, helping ensure a proper seal and fit on...

Product Description The MSA 10008295 is a PAPR and supplied-air respirator (SAR) headgear assembly designed for use with the PremAire Cadet Escape respiratory protection system. This headgear serves as the head-worn interface component that integrates with the broader escape respirator assembly, providing the structural...

Product Description The MSA 10042794 is a webbing-based D-ring connector designed for use in personal fall arrest and fall protection systems. It serves as a replacement or supplemental connection point within a harness or lanyard assembly, linking components at the D-ring attachment location. Constructed...

Product DescriptionThe MSA 10194789 is a Class C, Type I hard hat designed for general industrial and construction environments. Built from vented polyethylene with a short brim profile, it uses a 4-point ratchet suspension system made from HDPE and polyester for a secure, adjustable...

Product Description The MSA 475369BL29324 is a full brim hard hat from the V-Gard series, designed for impact resistance in industrial and construction environments. Built from polyethylene with an 8-point ratchet suspension, it meets ANSI/ISEA Z89.1-2014 Type I, Class E requirements, providing protection against...

Product DescriptionThe MSA 475369/BL71708 is a full brim hard hat from the MSA V-Gard series, designed for impact and electrical hazard protection on industrial and construction job sites. Built from polyethylene, it meets ANSI/ISEA Z89.1-2014 Type I, Class E standards as well as CSA...

Product DescriptionThe MSA 10057443 is a Type 1, Class E hard hat built on the V-Gard slotted cap platform, designed for impact and electrical hazard protection on commercial and industrial job sites. Constructed from high-density polyethylene, the shell resists impact while staying lightweight at...

Product DescriptionThe MSA 66716 is an Abrasi-Blast airline respirator hood designed to provide supplied-air respiratory protection during abrasive blasting and other high-hazard operations. The hood connects to a clean, compressed-air supply line, delivering breathable air to the wearer while a durable outer shell shields...

Product DescriptionThe MSA 455021 is a straight, high-pressure supplied air respirator (SAR) supply hose designed to deliver breathing-quality air from a remote air source to a respirator facepiece or hood assembly. Measuring 25 feet in overall length with a 3/8-inch inner diameter, this hose...