MSA SAFETY

Product Description The MSA SAFETY 10250606 V-Gard H2 Full Brim Safety Helmet is an ABS hard hat designed for enhanced head protection in industrial applications. This vented helmet features a Ratchet System with Mips Brain Protection and meets ANSI Z89.1 Type II, Class C...

Product DescriptionThe MSA V-Gard Protective Hat with MPN 814053 offers reliable head protection for various work environments. This gold, slotted, full brim hat features the Fas-Trac III suspension system for a secure fit. Comfortable, lightweight protection Polyethylene shell for superior impact protection Available with...

Product DescriptionMSA VSOHW-031-NB-A is a V-SHOCK fall limiter designed for safety in overhead environments. This unit features a ten-foot length and is capable of supporting a maximum load of three hundred ten pounds. The fall limiter includes a carabiner and a thirty-six C snaphook...

Product Description Msa Safety 63315-00A V-Tec self-retracting lifeline is a retractable lanyard designed for fall protection that uses a stainless steel cable and a precision-made spring radial energy absorber. The unit provides 50 ft (15 m) of reach, a 36CS swivel snaphook connector, a...

Product Description The MSA SAFETY 10219290 is a temporary horizontal lifeline system designed for fall protection in elevated work environments. Constructed with a steel cable lifeline, it spans up to 100 feet between anchor points, giving workers the lateral mobility they need to move...

Product Description The MSA SAFETY 10242640 is the V-Gard H2 Safety Helmet, a Type II hard hat designed to protect against both top and lateral impacts on industrial job sites. It ships in Hi-Viz Yellow/Lime with a ratchet suspension that adjusts with a gloved...

Product Description The Msa Safety 63306-00A is a self-retracting lifeline (SRL) designed for overhead anchoring, featuring a stainless steel cable lifeline and a polycarbonate housing. The unit provides a 310 lb working capacity, a 3/16 in cable diameter, a steel snap hook at the...

Product Description MSA Safety 10194785 is a V-Gard H1 safety helmet with Trivent Fas-Trac III pivot designed as a low-profile above-the-neck hard hat platform. It provides Type 1, Class C head protection with a ventilated high-density polyethylene shell and 4-point ratchet Fas-Trac suspension. The...

Product Description MSA Safety 10034088 is the V-Gard 500 cap-style hard hat providing non-vented head protection with a 4-point Fas-Trac III ratchet suspension. The polyethylene front-brim shell includes accessory slots, meets Type 1 Class E requirements, and is certified to ANSI/ISEA Z89.1, CSA Z94.1...

Product Description The MSA Safety C217095 is a Super-V cap-style hard hat that provides Type II industrial head protection and is certified to ANSI/ISEA Z89.1-2014 and CAN/CSA Z94.1-2015. The polyethylene shell measures 200 x 280 x 230 mm and weighs approximately 0.60 kg, offering...

Product DescriptionThe MSA SAFETY C211090 is a V-Gard front brim hard hat designed for industrial and construction environments where head protection is required. It features a ratchet suspension system for tool-free fit adjustment, along with a built-in lamp bracket and cord holder for hands-free...

Product DescriptionThe MSA SAFETY 816662 is an N95-rated replacement filter cartridge designed for use with the MSA Comfo Series half-mask and full-face respirators. These filter cartridges protect against dusts, particles, and mists in industrial and trade environments where airborne particulate exposure is a concern....

Product DescriptionThe MSA SAFETY 815179 is an acid gas and P100 combination respirator cartridge designed for use with MSA Comfo half-mask and full-face respirators. Each cartridge provides dual protection, filtering out acid gases and vapors while the P100 filter layer captures at least 99.97...

Product Description The MSA SAFETY 489353 is a snap-on filter cover designed for use with the Comfo series reusable half-mask respirator. It secures filter media in place over the respirator facepiece, maintaining a proper seal and protecting cartridges from physical damage during use. The...

Product Description The MSA SAFETY 818354 Flexi-Filter Pads are P95-rated particulate filter pads designed for use with MSA Advantage series half-mask and full-face respirators. Each pack contains two replacement pads that mount over compatible cartridge assemblies, providing an additional layer of particulate filtration. The...

Product Description MSA Safety 10126693 is a Fas-Trac III replacement suspension assembly for MSA Skullgard helmets that provides a 4-point large-sized ratchet harness with flush rear lug attachments to reduce pressure points. The assembly includes a graspable ratchet with smooth rotation and steadfast hold,...

Product Description The MSA Safety 475408 Skullgard full-brim hard hat is a phenolic-shell helmet engineered for hot, heavy industries and tested to radiant heat loads up to 350°F. It incorporates a Fas-Trac ratchet suspension and a smooth crown for use with welding equipment. The...

Product Description Msa Safety 10034184 is a nylon respirator pouch designed to store gas masks. The pouch measures 18 in by 12 in and provides a compact storage solution for Millennium and Advantage gas masks. Constructed from nylon for durable containment, it functions as...

Product Description Msa Safety SFP3267508 is an 8 ft anchorage cable sling designed as an anchorage connector for fall protection systems. The sling has a steel D-ring, a thimble end connection, a pass-through O-ring, a tie-off adapter pole hook and a snap hook connector....

Product Description Msa Safety 10242638 V-Gard H2 Safety Helmet is a Type II safety helmet designed to protect against lateral and top impacts and to provide enhanced lateral-impact protection via an integrated chinstrap. The helmet is constructed from ABS, offers an adjustable ratchet suspension...