LIONBEAM

Product DescriptionThe LIONBEAM sx-ex13 is an HDMI extender designed to transmit high-definition video and audio signals over standard CAT5E or CAT6 Ethernet cable up to 164 feet. It includes Power Over Cable (POC) functionality, which allows the transmitter and receiver to share a single...

Product DescriptionThe LIONBEAM lbpa51-443 is a full-motion TV wall mount designed for flat-panel displays ranging from 23 inches to 55 inches. It supports a maximum load of 66 pounds and delivers a full range of articulation: tilt from +3 to -10 degrees and swivel...

Product DescriptionThe LIONBEAM lb-0e-fd4 is a 4-inch-wide finger duct raceway sold in a 2-pack, designed for organized cable routing in professional low-voltage audiovisual and security installations. Each raceway features evenly spaced fingers that guide cables in and out smoothly, allowing technicians to separate and...

Product DescriptionThe LIONBEAM lb-ipspot16 is a 16-channel IP camera viewer designed to consolidate live and recorded surveillance feeds into a single management interface. It supports up to 16 simultaneous IP camera connections, giving security installers and facility technicians a centralized display solution for mid-scale...

Product Description The LIONBEAM lb-w6whcmp is a Category 6 CMP-rated plenum cable designed for structured wiring installations in air-handling spaces where building and fire codes require plenum-rated cabling. CMP (Communications Multipurpose Cable, Plenum) designation indicates the jacket compound meets UL 910 flame and smoke...

Product DescriptionThe LIONBEAM lb-doors-6u is a solid replacement door designed specifically for the LB-CABV2-6U rack cabinet. It replaces the existing door panel with a solid-face design, blocking direct visual access to installed equipment and adding a physical barrier at the cabinet front. This part...

Product DescriptionThe LIONBEAM lbp42-46dt is a heavy-duty tilting LCD wall mount bracket designed to support flat-panel displays ranging from 37 to 70 inches. It provides a free-tilting mechanism that allows the installer to adjust the viewing angle after mounting, reducing glare and improving sightlines...

Product DescriptionThe LIONBEAM lb-wro8 is an 8U open frame fixed wall rack designed for mounting network, AV, and low-voltage equipment directly to a wall surface. The open frame construction allows unrestricted access to cabling and hardware from the front and sides, making it a...

Product Description The LIONBEAM lb-pp5e48 is a 48-port Cat 5e patch panel built for structured cabling installations in a 2U rack form factor. It provides 48 RJ45 ports on the front face with a clean labeling strip for port identification, and IDC punch-down terminals...

Product Description The LIONBEAM lb-ms1r is a pack of 10 red momentary push button switches with single-pole single-throw (SPST) normally open contacts. Each switch is built for solder-terminal connection and fits panels with a 0.25-inch mounting hole. Momentary action means the circuit closes only...

Product Description The LIONBEAM fd-ca-cs-v1ud10.5 is a 1U vented cantilever rack shelf designed to hold equipment in open-frame or enclosed equipment racks. At 10.5 inches deep, it provides a stable, ventilated platform for networking gear, patch panels, or other rack-mounted devices. The cantilever design...

Product Description The LIONBEAM lb-d1001-bkt is a heavy-duty mounting bracket designed to secure surveillance cameras in demanding installations. Built for both indoor and sheltered outdoor use, it provides a stable, rigid mount that keeps cameras properly aimed over time. The bracket includes provisions for...

Product DescriptionThe LIONBEAM lb-hdmi-ipextx is a transmitter unit designed to extend HDMI signals over a standard IP network using Power over Ethernet (PoE). It handles signal distribution from an HDMI source to a paired receiver unit, eliminating the need for long dedicated HDMI cable...

Product DescriptionThe LIONBEAM lb-101pro-fbkt is a pre-installation plate designed for use with the LB-LCD101-PRO flush mount LCD monitor. It allows installers to mark and secure the intended mounting location before the final monitor installation takes place, preventing the spot from being covered or shifted...

Product DescriptionThe LIONBEAM lb-wro15 is a 15U open frame fixed wall rack designed for mounting networking, AV, or low-voltage equipment in commercial and residential installations. The open frame design allows unrestricted airflow around mounted equipment, reducing heat buildup in tighter spaces. Fixed wall mounting...

Product Description The LIONBEAM lb-ml120 is a mini electromagnetic door lock rated for 120 pounds of holding force. It operates on the principle of electromagnetism: when current flows through the silicon steel core, the unit generates a strong magnetic field that bonds the lock...

Product DescriptionThe LIONBEAM lb-btamp6 is a Bluetooth 5.0 in-wall stereo pre-amplifier designed for permanent installation in residential and light commercial audio distribution systems. Operating on 24 volts DC, it delivers 24 watts RMS per channel into a 4-ohm load using a Class-D amplifier topology....

Product DescriptionThe LIONBEAM lb-pc6awh7 is a 10-pack of slim-profile CAT6A patch cords measuring 7 feet in length, finished in white. CAT6A cabling supports 10-Gigabit Ethernet at frequencies up to 500 MHz, making these cords a practical choice for structured cabling installations in data centers,...

Product DescriptionThe LIONBEAM lb-rk2pc-38 is a 2-post open-frame cable management rack designed for structured cabling, patch panel organization, and network equipment installation in IT and low-voltage environments. Standing 38U tall at approximately 6 feet, the rack ships with casters for repositioning on raised floors...