EAGLE CUTTING TOOL

Product DescriptionThe EAGLE CUTTING TOOL 1080-039-D is a 39/64-inch high-speed steel (HSS) screw machine drill bit with a 1/2-inch reduced shank. Screw machine length drill bits are shorter and more rigid than jobber-length bits, making them well suited for drilling in confined spaces where...

Product Description The EAGLE CUTTING TOOL NHD-1250-27-I is a carbon steel hex die sized for 1/8-27 NPT pipe threading. It cuts National Pipe Taper threads on ferrous pipe and fittings, producing the tapered thread form required for pressure-tight, leak-resistant joints. The hex body profile...

Product Description The EAGLE CUTTING TOOL C300-019-D is a 19/64 inch cobalt jobber-length drill bit manufactured in the USA. Cobalt construction provides increased heat and wear resistance compared to standard high-speed steel, making this bit suited for drilling stainless steel, cast iron, hardened alloys,...

Product Description The EAGLE CUTTING TOOL HT-13750-8-B-D is a 1-3/8 inch diameter, 8 threads-per-inch (TPI) high-speed steel (HSS) hand bottom tap manufactured in the USA. Bottom taps feature minimal chamfer on the cutting end, allowing threads to be cut as close to the base...

Product Description The EAGLE CUTTING TOOL HT-1228-P-I is a 12-28 thread high-speed steel (HSS) hand plug tap designed for cutting internal threads in metal workpieces. The plug chamfer — typically 3 to 5 threads of lead — makes it a versatile choice for threading...

Product DescriptionThe EAGLE CUTTING TOOL TCT-5625-LT is a carbide tipped hole cutter designed to cut clean, precise holes in sheet metal, conduit boxes, electrical enclosures, and similar materials. The carbide cutting tip delivers extended tool life compared to standard bi-metal cutters, making it a...

Product DescriptionThe EAGLE CUTTING TOOL S400-015-I is a 15/64-inch high-speed steel (HSS) stub drill bit featuring a 135-degree split point geometry. The stub length body provides increased rigidity compared to standard jobber-length bits, reducing deflection and improving accuracy in applications where hole position tolerance...

Product DescriptionThe EAGLE CUTTING TOOL SCD100-017-D is a solid carbide jobber-length drill bit ground to a 17/64 inch diameter. Solid carbide construction delivers the rigidity and wear resistance required for production drilling in ferrous and non-ferrous metals, composites, and hard plastics. Jobber-length geometry balances...

Product DescriptionThe EAGLE CUTTING TOOL S300-026-I is a 13/32-inch cobalt jobber-length drill bit designed for high-speed drilling in ferrous metals, stainless steel, hardened alloys, and other demanding materials. Cobalt construction provides greater heat resistance than standard high-speed steel, allowing the bit to maintain its...

Product Description The EAGLE CUTTING TOOL TFZ-27276-ET is a carbide tipped annular cutter designed for magnetic drill press and rotary broaching applications. With a 2-3/8 inch cutting diameter and a 2 inch length of cut (LOC), this cutter removes a core slug rather than...

Product Description The EAGLE CUTTING TOOL CB-SA-1-D is a cylindrical end cut carbide burr designed for material removal, deburring, shaping, and surface finishing in metal fabrication and machining applications. The SA-1 designation indicates a cylindrical (cylinder) profile with an end cut geometry, and this...

Product Description The EAGLE CUTTING TOOL 1090D-038-I is a 19/32-inch brad point Dyno SD drill bit with a 1/2-inch shank, designed for accurate boring in wood and wood-composite materials. Brad point geometry centers the bit on contact and reduces wandering at the start of...

Product DescriptionThe EAGLE CUTTING TOOL HT-10000-12-B-I is a 1 inch, 12 threads-per-inch (TPI) high-speed steel (HSS) hand bottom tap designed for cutting internal threads to the bottom of a blind hole. Bottom taps feature minimal chamfer on the lead threads, allowing thread cutting to...

Product DescriptionThe EAGLE CUTTING TOOL CB-SD-5-L6-D is a ball-shaped rotary burr designed for material removal, shaping, and deburring in metalworking and fabrication applications. With a 0.5 inch cutting diameter and a 6 inch overall length (OAL), this burr provides extended reach into deep cavities...

Product DescriptionThe EAGLE CUTTING TOOL SDS4350-1875-12-D is an SDS-shank masonry drill bit engineered for rotary hammer applications in concrete, block, brick, and other masonry substrates. The bit measures 3/16 inch in diameter with a 12-inch overall length, providing reach for deeper anchor holes and...

Product Description The EAGLE CUTTING TOOL H204-110-D is a high-speed steel (HSS) heavy-duty jobber-length drill bit with a 135-degree split point. The 135-degree split point geometry reduces walking on contact, allowing the bit to bite into material quickly without a center punch in most...

Product DescriptionThe EAGLE CUTTING TOOL CB-SG-6-D is a tree point carbide burr designed for material removal, shaping, and deburring in metalworking and fabrication applications. Available in a 5/8-inch profile, this burr features both single cut and double cut geometry, giving technicians and tradespeople flexibility...

Product Description The EAGLE CUTTING TOOL NHD-20000-115-I is a 2-inch, 11.5 TPI carbon steel hex die designed for cutting National Pipe Taper (NPT) threads on pipe. It fits standard hex die stocks and is used to cut or recut external tapered pipe threads to...

Product Description The EAGLE CUTTING TOOL TFZ-27142-ET is a carbide tipped annular cutter designed for drilling precise, clean holes in steel and other ferrous metals. The cutter features a 1-5/16 inch cutting diameter and a 1 inch depth of cut, making it well suited...

Product DescriptionThe EAGLE CUTTING TOOL TCT-13125-LT is a carbide tipped hole cutter designed to produce clean, accurate holes in sheet metal, electrical enclosures, HVAC ductwork, and similar trade applications. The 1-5/16 inch cutting diameter makes it a common size for conduit knockouts and panel...