CROWN STEAM

Product Description The CROWN STEAM 9-3296-1 is a drain hose designed for use in commercial steam equipment. Measuring 1.25 inches in diameter and 20 inches in length, this hose routes condensate or drain water away from the unit during normal operation. It serves as...

Product Description The CROWN STEAM 9272-1 is a 120-volt solenoid valve designed for steam system applications. A solenoid valve uses an electromagnetic coil to open or close a flow path, allowing precise on/off control of steam within a connected system. This part is typically...

Product Description The CROWN STEAM 7-5015 is a replacement element assembly supplied complete with a gasket, designed for use in commercial steam equipment operating at 208 volts. The heating element generates the thermal energy required to produce steam, while the included gasket ensures a...

Product DescriptionThe CROWN STEAM 9224-1 is a timer delay relay (TDR) designed for cooling applications, operating at 120 volts. It provides a 7-minute delay-on-break function that holds a circuit open or closed for a timed interval after a signal is removed. This type of...

Product Description The CROWN STEAM 9441-1 is a flexible hose designed for steam equipment applications. With an outer diameter of 0.375 inches and a length of 23 inches, this hose provides the flexibility needed to route connections in tight or angled configurations within commercial...

Product DescriptionThe Crown Steam 4204-12 is a replacement wire harness designed for the EC-20T steamer unit. Wire harnesses bundle and route electrical connections between internal components, ensuring consistent signal and power delivery throughout the appliance. This harness maintains proper wiring organization and protects conductors...

Product DescriptionThe CROWN STEAM 7-5027 is a replacement heating element rated at 18 kW and 208 volts, designed for commercial steam equipment. Heating elements convert electrical energy into heat, making them a core component in steamers, steam kettles, and similar foodservice or industrial steam...

Product Description The CROWN STEAM 9-3007 is a funnel strainer designed for use in commercial steam equipment. Funnel strainers catch debris and particulate before they enter water lines, steam generators, or fill assemblies, helping maintain clean fluid flow and protecting downstream components. This part...

Product Description The CROWN STEAM 9011-4 is a 90-degree pipe elbow fitting made from black iron, sized for 3/4-inch pipe. It redirects pipe runs at a right angle and is used in steam, gas, and hydronic piping systems. Black iron fittings are the standard...

Product Description The CROWN STEAM 9-3296 is a drain hose designed for use in commercial steam equipment applications. Measuring 1.25 inches in diameter and 10 inches in length, this hose handles condensate and drain flow from steam-generating units. It serves as a direct OEM-style...

Product DescriptionThe CROWN STEAM Aug-23 is a hand hole gasket designed to seal hand hole openings on steam boilers and pressure vessels. Hand hole gaskets provide a reliable pressure-tight seal at inspection and cleanout access points, preventing steam and hot water from escaping at...

Product Description The Crown Steam 3-PG30 is a pressure gauge rated for a 0-30 PSI range, designed for use in steam and hydronic heating systems. It provides a continuous visual reading of system pressure, allowing technicians to monitor operating conditions and diagnose faults at...

Product Description The CROWN STEAM 3162-2 is a replacement heating element assembly rated at 220 volts and 2.5 kilowatts (kW), designed for commercial skillet applications. This element converts electrical energy into consistent, controlled heat within the skillet unit. It is a direct service part...

Product Description The CROWN STEAM 5887-2 is a liquid level controller designed to monitor and regulate water or fluid levels in commercial steam equipment. Operating at 120/240VAC with a 1.5VA power draw and a 1/3 HP rating, it is built for reliable integration into...

Product DescriptionThe CROWN STEAM 7-5019 is a replacement heating element rated at 12 kilowatts (kW) and 208 volts, designed for commercial steam equipment. Heating elements convert electrical energy into heat within the water chamber or tank of a steam appliance. This element is a...

Product Description The CROWN STEAM 7-5031 is a 24 kilowatt electric heating element rated for 208-volt operation, designed for use in commercial steam equipment. Heating elements of this type convert electrical energy into heat to generate steam within the unit's chamber or tank. This...

Product DescriptionThe CROWN STEAM 8-6012 is a California Code switch designed for use in commercial steam equipment. This switch serves as a code-compliant safety or control component, meeting California regulatory requirements for steam-generating systems. It is typically installed by licensed service technicians working on...

Product Description The Crown Steam S05N-38 is a genuine OEM replacement split lock washer, #8, SS. This part is designed to fit models ES-30 and ES-40. It ensures secure fastening in various applications within compatible Crown Steam equipment. Genuine OEM Replacement Part Split Lock...

Product DescriptionThe Crown Steam 1208437 is an electric heating element designed for use in commercial steam equipment. This element operates at two hundred eight volts with a power rating of seven and a half kilowatts. It provides robust heating capability suitable for various applications....

Product Description The CROWN STEAM 49888 is a stationary disc designed for efficient use in various applications. This product is built for reliability and longevity in demanding environments. Durable construction for long-lasting performance. Compatible with multiple types of equipment. Easy to install and maintain....