Xtrweld XTRHSIARH25 Argon Inert Hose Assembly 25 Ft

Product Description

The XTRWELD XTRHSIARH25 is a 25-foot argon and inert-gas hose assembly designed for shielding gas delivery in MIG and TIG welding setups. With a 0.25-inch inner diameter and a maximum working pressure of 300 psi, this hose handles the flow demands of argon, argon-mix, and other inert shielding gases. The 5/8-18 inch threaded fittings match standard regulator and torch connections common in professional welding environments. Welding technicians and gas apparatus installers use this assembly to route shielding gas from a cylinder regulator to a welding machine or torch body. The 25-foot length provides enough reach for most bench and field welding stations without requiring additional extensions.

This hose assembly is suited for use in fabrication shops, maintenance facilities, and field welding applications where argon or inert-gas shielding is required. It connects a cylinder-mounted regulator to a wire feeder, TIG torch, or welding machine inlet. The 25-foot run is a standard working length for single-station setups. Installation is handled by welding equipment technicians or qualified gas apparatus installers following applicable compressed gas and welding safety codes.

Key Features

• 0.25-inch inner diameter sized for standard argon and inert-gas shielding flow rates
• 300 psi maximum working pressure rated for compressed inert-gas service
• 5/8-18 inch threaded end fittings compatible with standard regulator and torch connections
• 25-foot length provides practical reach for single-station welding setups
• Dedicated inert-gas service construction to maintain gas purity and prevent contamination

Compatibility

Designed as a replacement or add-on hose assembly for argon and inert-gas shielding systems using 5/8-18 inch threaded regulator and torch fittings, as found on standard MIG and TIG welding equipment.

Installation Notes

Installation should be performed by a qualified welding equipment technician or certified gas apparatus installer. Close the cylinder valve and bleed residual pressure from the line before disconnecting any existing hose. Hand-tighten fittings first, then snug with a wrench - do not overtighten, as brass fitting threads can be damaged. After installation, leak-test all connections with an approved leak-detection solution before resuming welding operations.