Wiremold UL404BC Power Outlet Strip 16-outlet 120V 15A

Product Description

The WIREMOLD UL404BC is a 16-outlet power strip designed for raceway-mount installation in commercial and industrial environments. Built from aluminum with a gray finish, it measures 48 inches in length and provides 15 amps of capacity at 120 volts through a NEMA 5-15R outlet configuration. The 6-foot power cord connects to a standard 5-15P plug. Outlets are spaced 2.5 inches apart along the strip, reducing crowding when multiple plugs are in use simultaneously. This strip is cULus Listed, confirming it meets recognized safety standards for both the United States and Canada. Electricians and facilities maintenance professionals are the primary installers.

The UL404BC is intended for raceway-mount applications where a high outlet count is needed along a defined run. Typical installations include workbenches, server rooms, laboratory benches, and industrial equipment areas where multiple devices must be powered from a single circuit. The aluminum housing provides durability in light industrial settings. At 48 inches, the strip fits standard raceway channel lengths common in commercial buildouts. The 16-outlet layout supports dense equipment arrangements without requiring additional power strips or extension cords.

Key Features

• 16 NEMA 5-15R outlets spaced 2.5 inches apart for reduced plug crowding
• Aluminum housing in gray for durability in light industrial environments
• Raceway-mount design integrates with standard surface raceway channel systems
• 48-inch strip length covers extended equipment runs
• 6-foot cord with NEMA 5-15P plug for direct connection to a standard 15-amp circuit
• cULus Listed to meet safety requirements in the US and Canada

Compatibility

Designed for raceway-mount installation; compatible with standard surface raceway channel systems that accept a 48-inch outlet strip with a NEMA 5-15R configuration at 15 amps and 120 volts.

Installation Notes

Installation should be performed by a qualified electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize the circuit before mounting the strip or making any wiring connections to the raceway system. Verify that the branch circuit supplying the strip is rated for at least 15 amps at 120 volts and is protected by an appropriately rated overcurrent device. Do not exceed the 15-amp total load rating across all connected devices.