Wiremold PN10L08V Surface Raceway 8 Ft 1 Channel Ivory

Product Description

The WIREMOLD PN10L08V is a single-channel surface-mount raceway designed to route and protect electrical wiring along walls and ceilings in both residential and light commercial installations. The raceway measures 8 feet in overall length, 1-11/16 inches wide, and 13/16 inches deep, providing a clean ivory-finished enclosure for low-voltage or line-voltage conductors. It features a continuous cover design for a smooth, uninterrupted appearance across the full run length. Listed to UL/cUL Guide RJTX and compliant with Article 386 of the NEC and Section 12-600 of the CEC, making it suitable for code-compliant wiring projects.

This raceway is used in commercial office fit-outs, classroom AV installations, retail environments, and residential remodel projects where exposed conduit is not acceptable. The single-channel configuration keeps one wire run separated and protected without the bulk of multi-channel systems. The ivory finish blends with standard interior wall colors, reducing the need for paint touch-up after installation. Electricians and low-voltage installers typically specify this product for surface wiring of power, data, or communication cables in finished spaces.

Key Features

• 8-foot length suits standard wall runs without mid-run splices
• Continuous cover provides a smooth, unbroken exterior along the full raceway length
• Single-channel design organizes one wire or bundle in a dedicated enclosed path
• Ivory finish suited for standard interior wall and ceiling surfaces
• Compliant with NEC Article 386 and CEC Section 12-600
• UL/cUL Listed under Guide RJTX, File E90378

Compatibility

Designed as an OEM-style surface raceway component compatible with WIREMOLD PN10 series raceway fittings, couplings, and end fittings intended for single-channel surface wiring systems.

Installation Notes

Installation is typically performed by a licensed electrician in accordance with NEC Article 386 or the applicable local electrical code. De-energize all circuits in the work area before mounting or wiring the raceway. Secure the base to the wall surface at intervals required by the governing code, then route conductors before snapping the continuous cover into place. Do not exceed the fill capacity or voltage rating of the raceway as defined by the applicable code and manufacturer guidelines.