Wika 52060A009G4 Bimetal Dial Thermometer 6 in Stem

Product Description

The WIKA 52060A009G4 is a bimetal dial thermometer designed for temperature measurement in industrial and mechanical systems. It features a 6-inch stem length and reads from 50 to 400 degrees F, making it suitable for a wide range of process monitoring applications. The housing is constructed from 18-8 stainless steel for corrosion resistance in demanding environments. The adjustable angle mount allows the dial to be repositioned for clear readability in tight or awkward installation locations. Accuracy is rated at 1.0 percent of full scale. HVAC technicians, plumbers, and mechanical contractors typically specify this type of thermometer for pipe, duct, or equipment surface temperature monitoring.

The WIKA 52060A009G4 is used in residential and commercial HVAC systems, plumbing lines, boiler installations, and general industrial process piping where reliable immersion-style temperature readings are required. The 6-inch stem length provides adequate immersion depth for accurate readings in standard pipe diameters. The adjustable angle mount is particularly useful in installations where direct front-facing access to the gauge is limited, such as in mechanical rooms or tight equipment bays.

Key Features

• Temperature range: 50 to 400 degrees F (10 to 200 degrees C)
• 6-inch stem length for proper immersion depth in standard pipe applications
• Adjustable angle mount for flexible dial positioning
• 18-8 stainless steel housing for corrosion resistance
• 1.0 percent full-scale accuracy

Compatibility

Designed as an OEM-style replacement or direct-install bimetal thermometer for use in HVAC, plumbing, and light industrial piping systems requiring immersion temperature measurement in the 50 to 400 degrees F range.

Installation Notes

Installation is typically performed by a licensed HVAC technician or plumber. The system should be depressurized and cooled before inserting or removing the thermometer stem from the thermowell or pipe fitting. Use a properly sized thermowell or fitting to ensure a sealed installation. Verify local mechanical codes for thermometer placement requirements on boilers, chillers, and process lines.