WIDIA Widia 6853747 Corner Radius End Mill 3/4 in 5 Flute Carbide

Widia 6853747 Corner Radius End Mill 3/4 in 5 Flute Carbide

Brand: WIDIA
SKU: 6853747
Availability: In Stock

Ships same day if ordered by 12 pm

$727.44
$727.44
HAVE A QUESTION?

Our team is ready to help!

  • Voomi Supply

    Secure Payments

  • Voomi Supply

    Easy Returns

  • Voomi Supply

    Expert Advice

  • Voomi Supply

    Fast Shipping

Product Description

The WIDIA 6853747 is a solid carbide corner radius end mill from the Series 570T line, designed for demanding material removal in steel, stainless steel, cast iron, and high-temperature alloys. It carries a 0.030-inch corner radius and a 38-degree medium helix, providing a balance of chip evacuation and cutting stability across roughing and finishing operations. The 5-flute, single-end geometry with close pitch and right-hand flute direction supports controlled chip loads at higher feed rates. WP15PE PVD coating adds wear resistance and thermal protection. This tool is centercutting, allowing direct plunge entry without a pre-drilled pilot hole. It is used with standard straight-cylindrical toolholders in CNC machining centers.

This end mill is suited for general-purpose and production machining where a single tool must handle both roughing passes and finishing cuts on ferrous workpieces. Its variable index feature reduces harmonics and chatter during aggressive cuts. Applications include milling slots, pockets, profiles, and contoured surfaces in steel and stainless fabrication, job shop work, and aerospace component machining involving high-temperature alloys. The 2.25-inch length of cut and 5-inch overall length give adequate reach for most standard cavity and wall features without extended-reach tooling.

Key Features

  • 0.030-inch corner radius reduces stress concentrations at the tool nose and workpiece edge
  • WP15PE PVD coating provides wear resistance across steel, stainless steel, cast iron, and high-temperature alloy materials
  • 5-flute close-pitch design supports high material removal rates in roughing and finishing
  • Variable index geometry reduces chatter and vibration during aggressive cuts
  • Centercutting construction allows direct plunge milling without a pre-drilled entry point
  • 38-degree medium helix balances chip evacuation and radial cutting force

Compatibility

Designed for use with straight-cylindrical toolholders. Primary workpiece materials include steel, stainless steel, and cast iron. Secondary workpiece material is high-temperature alloy. Part of the WIDIA Series 570T end mill family.

Installation Notes

Installation should be performed by a qualified machinist or CNC setup technician. Secure the shank fully within the toolholder to the manufacturer-specified gauge line before tightening; never clamp on the fluted section. Verify runout at the tool tip before beginning a cut, as excessive runout accelerates edge wear and reduces surface finish quality. Follow the machine tool builder and tooling manufacturer feed and speed recommendations for the specific workpiece material and depth of cut.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Technical Specifications
Mill Diameter
0.75 inches
Number of Flutes
5
Length of Cut
2.25 inches
Overall Length
5 inches
Corner Radius
0.030 inches
Shank Diameter
0.75 inches
Helix Angle
38 degrees
End Mill Material
Solid Carbide
Coating
WP15PE (PVD)
Flute Direction
Right Hand
Cutting Direction
Right Hand
Shank Type
Straight-Cylindrical
Pitch
Close
Variable Index
Yes
Centercutting
Yes
Material Removal Type
Roughing and Finishing
Primary Workpiece Material
Steel, Stainless Steel, Cast Iron
Secondary Workpiece Material
High-Temperature Alloy
Series
570T
Weight
0.959 pounds
Brand
WIDIA
Manufacturer Part Number
6853747
WIDIA Widia 6853747 Corner Radius End Mill 3/4 in 5 Flute Carbide

Vendor: WIDIA

Widia 6853747 Corner Radius End Mill 3/4 in 5 Flute Carbide

$727.44

Vendor: WIDIA

Widia 6853747 Corner Radius End Mill 3/4 in 5 Flute Carbide

$727.44

Related Products

Customer Support Image

Need Support?

Call Jack and His Team