Widia 3607096 Ngd-k Grooving Insert Size 3 Left Hand

Product Description

The WIDIA 3607096 is a single-end, left-hand Top Notch grooving insert in the NGD-K series, designed for external grooving and turning operations on CNC lathes and turning centers. Built from carbide with a TiAlN coating applied via PVD process, it carries WIDIA grade TN6010 and delivers a cutting width of 0.0941 inches (2.390 mm) with a maximum depth of cut of 0.2496 inches (6.34 mm). The positive rake geometry and K-style chip breaker promote controlled chip evacuation across a wide range of workpiece materials. Installation and tool changes use a clamp-style insert holding method, keeping setup time low in production environments.

This insert is engineered for grooving and turning applications across multiple material groups, including stainless steel, carbon and alloy steel, cast iron, non-ferrous metals, and super-alloys and titanium. It is suited for both light finishing and moderate material removal passes where groove width consistency is critical. The single cutting edge design and precise 0.0075-inch corner radius make it appropriate for tight-tolerance groove profiles in aerospace, oil and gas, and general machining shops.

Key Features

• Cutting width of 0.0941 inches (2.390 mm) for precise groove sizing
• Maximum depth of cut of 0.2496 inches (6.34 mm)
• TiAlN PVD coating in WIDIA grade TN6010 for extended tool life on difficult materials
• Positive 10-degree rake angle with K chip breaker for controlled chip flow
• Compatible with grooving and turning operations on the same holder
• Clamp-style insert holding for secure, repeatable seating

Compatibility

Designed for use with NGD-K series Top Notch grooving and turning toolholders that accept size 3 inserts. ANSI and ISO code NGD3094LK. Suitable for grooving and turning operations as specified by the manufacturer.

Installation Notes

Licensed machinists and CNC setup technicians typically install grooving inserts of this type. Power down and lock out the machine spindle before seating or replacing inserts. Verify the insert is fully seated against the pocket walls before engaging the clamp, and confirm torque on the clamp screw using the toolholder manufacturer's specification. Inspect the insert seat for chips or debris before installation to avoid seating errors that can affect groove width accuracy.