Whirlpool W11707573 Hmi Door Hinge Wiring Harness

Product Description

The WHIRLPOOL W11707573 is a wiring harness that connects the HMI (human-machine interface) control panel to the door hinge assembly on select over-the-range and built-in microwave units. This harness carries low-voltage signal and power between the user interface board and the door hinge point, maintaining communication between the control panel and door-mounted components. It is a direct OEM replacement part sourced from Whirlpool and is typically installed by appliance technicians or qualified HVAC and appliance service professionals during control board or door assembly repairs.

This harness is designed for use in over-the-range and built-in microwave installations where the HMI panel is integrated with or routed through the door hinge area. It is a common service part when the control panel loses communication with door-side components, or when the existing harness shows signs of wear, damage, or failed continuity. The part measures approximately 7.14 x 4.0 x 1.0 inches and fits a range of Whirlpool, KitchenAid, Maytag, and JennAir branded microwave models.

Key Features

• Direct OEM replacement wiring harness from Whirlpool
• Routes signal and low-voltage power from HMI control panel to door hinge assembly
• Compact form factor at 7.14 x 4.0 x 1.0 inches for straightforward reinstallation
• Compatible with multiple Whirlpool, KitchenAid, Maytag, and JennAir microwave model families
• Designed for OEM-level fit and function with no modification required

Compatibility

Compatible with the following models: JMHF930RSS00, JMHF730RBL00, KMMF530PPS00, KMMF730PPS00, KMMF530PWH00, KMMF530PBS00, MMMF8030PZ00, WMMF7330RB00, WMMF7530RZ00, YJMHF930RSS00, WMMF7330RZ00, WMMF7330RW00, YJMHF730RBL00, WMMF7330RV00, WMMF7530RV00, YKMMF730PPS00, YWMMF7330RZ00, YKMMF530PPS00, YMMMF8030PZ00.

Installation Notes

Disconnect power to the microwave unit at the circuit breaker before beginning any disassembly. This harness is typically accessed by removing the door or control panel fascia and routing the new harness through the hinge channel per the unit service manual. Handle connector tabs carefully to avoid cracking aged plastic clips. Installation is generally performed by a qualified appliance technician familiar with low-voltage wiring and microwave door assembly procedures.