Westlake Pipe Fittings g208 Pvc 90 Elbow 8 Inch Sdr 35

Product Description

The WESTLAKE PIPE FITTINGS g208 is an 8-inch SDR 35 PVC gasketed 90-degree elbow, also referred to as a 1/4 bend, designed for gravity sewer and drainage systems. This fitting accepts a rubber gasket joint connection, eliminating the need for solvent cement at the joint and allowing for faster field assembly. Rated for SDR 35 service, the PVC construction provides resistance to common sewer gases and soil conditions. At 8 pounds per unit, it is sized for mainline sewer work and is typically installed by licensed plumbers and underground utility contractors working on residential or light commercial drain, waste, and vent systems.

This elbow is used in underground sewer and storm drainage installations where a 90-degree change of direction is required in 8-inch mainline pipe runs. SDR 35 PVC fittings are a standard choice for municipal-style gravity sewer laterals and building sewer connections. The gasketed joint design is well suited for installations requiring slight deflection tolerance at joints, which is common in buried sewer runs on sloped terrain or where soil settlement is a factor.

Key Features

• 90-degree (1/4 bend) elbow configuration for right-angle direction changes in sewer mains
• Gasketed push-on joint connection for faster assembly without solvent cement
• SDR 35 PVC construction rated for gravity sewer and drainage service
• 8-inch fitting size suitable for mainline sewer lateral applications
• PVC material resists corrosion from sewer gases and typical soil conditions

Compatibility

Designed as an OEM-style replacement and new-installation fitting for 8-inch SDR 35 PVC gasketed sewer pipe systems following ASTM D3034 standards for gravity sewer service.

Installation Notes

Installation should be performed by a licensed plumber or qualified underground utility contractor in accordance with local plumbing codes and applicable provisions of the IPC or IFGC. Before making any joint connections, confirm that the pipe spigot end and gasket seating surface are clean and properly lubricated per the fitting manufacturer guidelines. All buried sewer fittings should be installed with adequate bedding and backfill compaction to prevent joint separation from soil movement. Never exceed the pressure or deflection limitations specified for SDR 35 gravity sewer service.

Technical Specifications

• Fitting Size: 8 inches
• Schedule/Class: SDR 35
• Elbow Degree: 90 degrees
• Connection Type: Gasketed
• Fitting Material: PVC
• Weight: 8 pounds

Standard Information

• Brand: WESTLAKE PIPE FITTINGS
• Manufacturer Part Number: g208