Werner H212006 Fall Protection Harness 400 Lb 3XL

Product Description

The WERNER H212006 is a full-body fall protection harness rated for a 400-pound load capacity, built for general-purpose applications across construction, electrical, roofing, and industrial trades. It features a single dorsal D-ring positioned at the back, the standard anchor-point configuration for most vertical and self-retracting lifeline (SRL) fall arrest setups. Sized for 3X-Large wearers, the harness delivers the structural webbing and hardware needed to meet OSHA fall protection requirements on job sites where workers operate at heights above six feet. Licensed contractors and journeymen installers are the primary end users for this style of harness.

This harness is intended for general-purpose fall arrest use across a wide range of trade applications, including commercial construction, industrial maintenance, tower work, and utility installation. The single back D-ring design suits standard fall arrest systems pairing with lanyards, SRLs, or overhead anchor connectors. It is appropriate for use where a single-point dorsal connection satisfies the job-site fall protection plan. The 3X-Large sizing accommodates larger-framed workers requiring a properly fitted, load-rated harness rather than an adjusted smaller size.

Key Features

• 400-pound load capacity meets OSHA and ANSI Z359 general fall arrest requirements
• Single dorsal D-ring at the back for standard fall arrest lanyard and SRL connections
• 3X-Large sizing provides proper fit for larger-framed workers without over-adjustment
• General-purpose harness classification covers a broad range of residential and commercial trade applications
• Personal fall protection harness type designed for individual worker fall arrest use

Compatibility

Designed as an OEM-style general-purpose fall arrest harness compatible with standard dorsal D-ring lanyards, self-retracting lifelines, and overhead anchor systems used in residential and commercial fall protection programs.

Installation Notes

Fall protection harnesses must be inspected before each use for webbing damage, hardware wear, and proper buckle function. A qualified competent person, as defined by OSHA 29 CFR 1926.502, should supervise fitting and deployment of fall arrest equipment. Power down or de-energize any adjacent electrical systems before working at height near energized components. Never modify, repair, or field-alter harness webbing or hardware; a harness that has arrested a fall must be removed from service immediately and inspected before any reuse determination.