Watts pwpl10ffm20 Pleated Sediment Filter 20 Micron 10 in

Product Description

The WATTS pwpl10ffm20 is a 10-inch full flow pleated sediment filter cartridge rated at 20 microns. It uses a synthetic, cellulose-free filter media with no additives or binders, which eliminates the risk of foaming during filtration. The pleated design delivers greater surface area than wound, spun, or melt-blown alternatives, resulting in a lower pressure drop and higher flow rates. This cartridge is suited for residential and light commercial water filtration systems and is installed by plumbers or water treatment technicians. Operating temperature ranges from 40 degrees F to 140 degrees F, with a maximum working pressure of 40 psi.

The pwpl10ffm20 is designed for point-of-entry and point-of-use water filtration applications where sediment and rust particle reduction are required. Its lower pressure drop supports the use of smaller filter housings, which can reduce capital equipment costs in new installations or retrofit projects. The 4 GPM flow rate and 10-inch form factor make it a practical choice for standard residential filter housings. The thicker pleated media retains more void space than thin rigid media types, improving particle capture and dirt-holding capacity over the service life of the cartridge.

Key Features

• 20-micron pleated sediment filtration for sediment and rust reduction
• Greater surface area than wound, spun, or melt-blown filter media
• Lower pressure drop supports higher flow rates up to 4 GPM
• Cellulose-free synthetic media contains no additives or binders
• Extended dirt-holding capacity reduces replacement frequency and filtration costs
• Compatible with smaller filter housings to lower capital equipment costs

Compatibility

Designed as an OEM-style replacement cartridge for standard 10-inch sediment filter housings used in residential and light commercial water filtration systems.

Installation Notes

Installation should be performed by a licensed plumber or qualified water treatment technician. Shut off the water supply and relieve system pressure before opening the filter housing and removing the spent cartridge. Inspect the housing o-ring for wear and replace if necessary before seating the new cartridge. Follow local plumbing codes and the housing manufacturer guidelines for proper torque and reassembly.

Technical Specifications

• Micron Rating: 20 microns
• Filter Length: 10 inches
• Flow Rate: 4 GPM
• Maximum Pressure: 40 psi
• Temperature Range: 40 degrees F to 140 degrees F
• Reduction Claims: Sediment, Rust
• Media Type: Synthetic, cellulose-free, no additives or binders
• Product Type: Replacement Cartridge

Standard Information

• Brand: WATTS
• Manufacturer Part Number: pwpl10ffm20