Waterway Plastics 212-3340 Gunite Venturi Tee 10in Pool Fitting

Product Description

The WATERWAY PLASTICS 212-3340 is a 10-inch gunite venturi tee designed for pool and spa plumbing systems. This plastic fitting uses a 7/16-inch orifice to create a venturi effect, drawing air or water into the flow stream at a rated flow range of 17 to 20 GPM. The port configuration is 1-1/2 inches socket by 1/2 inch socket by 1 inch spigot by 1-1/2 inch spigot, giving installers multiple connection points in a single compact body. Pool service professionals and licensed plumbers install this fitting during gunite pool construction or retrofit plumbing work where induction-style water distribution is required.

This venturi tee is intended for in-wall or in-floor pool plumbing installations, particularly in gunite and shotcrete pool builds where fittings are embedded in the shell. It is suited for residential and light commercial pool systems. The multi-port connection pattern accommodates main circulation lines alongside smaller branch lines, making it a practical choice for pool builders routing both supply and return plumbing in tight spaces. Flow performance is rated between 17 and 20 GPM through the venturi orifice.

Key Features

• 10-inch gunite venturi tee body for in-wall pool plumbing applications
• 7/16-inch venturi orifice rated for 17 to 20 GPM flow
• Multi-port configuration: 1-1/2 inches socket, 1/2 inch socket, 1 inch spigot, 1-1/2 inch spigot
• Plastic construction resistant to pool water chemistry
• Compact footprint suited for embedding in gunite or shotcrete pool shells

Compatibility

Designed as an OEM-style replacement or new-installation fitting for gunite and shotcrete pool plumbing systems requiring a venturi tee with a 7/16-inch orifice at 17 to 20 GPM.

Installation Notes

This fitting is typically installed by licensed pool contractors or plumbers during pool shell construction or plumbing renovation. Shut off all pumps and isolate the circulation system before any fitting work on an existing installation. Solvent-weld connections should follow the fitting manufacturer's recommended primer and cement procedures for PVC or ABS as applicable. Verify that the fitting orientation and orifice direction align with the intended flow path before embedment in gunite or concrete.