Walter-titex 5058684 Jobber Drill Bit 2.25mm Hss Oxide

Product Description

The WALTER-TITEX 5058684 is a jobber length drill bit designed for precise, consistent hole making in ferrous metals. Built from high speed steel with an oxide coating, this two-flute bit runs at 2.25 mm (0.0886 inches) in diameter with a 118-degree standard point angle and a web-thinned, tapered web configuration for reduced thrust and cleaner entry. The overall length is 53.00 mm (approximately 2-3/32 inches), and the flute length is 27.00 mm (approximately 1-1/16 inches). It carries a straight-cylindrical shank and belongs to Series A1211. Installation is performed by licensed machinists, maintenance technicians, and trained tradespeople working in metalworking and fabrication environments.

This drill bit is rated for primary workpiece materials including cast iron and steel, matching ISO material codes K and P. It is suited for blind hole drilling and stack drilling applications. The 8xD flute-to-diameter ratio supports efficient chip evacuation during moderate-depth cuts, with a maximum drilling depth of 23.00 mm (0.906 inches). It conforms to ANSI and ISO standards as well as BS and DIN specification designations, making it appropriate for both domestic and international shop floor requirements where consistent tolerances and general-purpose performance are needed.

Key Features

• High speed steel construction with oxide coating for wear resistance in ferrous materials
• 118-degree standard point angle with web-thinned, tapered web for reduced entry thrust
• Two spiral flutes in regular spiral type for efficient chip removal
• Straight-cylindrical shank at 0.0886 inches diameter for standard chuck compatibility
• Blind hole and stack drilling capability up to 23.00 mm depth
• Conforms to ANSI, ISO, BS, and DIN standards; diameter tolerance h8

Compatibility

Designed as a general-purpose OEM-style jobber length drill bit for use in standard drill chucks accepting straight-cylindrical shanks within the 2.00 mm to 3.00 mm diameter range, suitable for cast iron and steel workpieces.

Installation Notes

Installation and use of this drill bit should be performed by qualified machinists or trained tradespeople familiar with metalworking practices. Ensure the drill press, hand drill, or CNC spindle is powered down and fully stopped before inserting or removing the bit from the chuck. Secure the workpiece with appropriate clamping before drilling to prevent movement. Follow applicable shop safety standards and manufacturer speed-and-feed recommendations for the workpiece material and bit diameter.