Walter Surface Technologies 11T252 Cut-off Wheel 5 in

Product Description

The WALTER SURFACE TECHNOLOGIES 11T252 is a Type 1 resinoid-bonded aluminum oxide cut-off wheel designed for aggressive cutting on steel and stainless steel. Measuring 5 inches in diameter and 1/16 inch thick with a 7/8 inch arbor hole, this reinforced wheel is rated to a maximum of 12,200 RPM. The A36 specification indicates a 36-grit aluminum oxide abrasive matrix, suited for fast, clean cuts with minimal material waste. It is installed on angle grinders by metalworking tradespeople, fabricators, and maintenance technicians working on ferrous and non-ferrous metal stock, pipe, and structural shapes.

This cut-off wheel is intended for use on angle grinders in applications involving steel and stainless steel cutting. The Type 1 (01/41) flat profile makes it appropriate for straight-line cuts on flat bar, pipe, sheet metal, and structural sections in both shop and field environments. The 5 inch diameter fits common mid-size angle grinders and is a standard choice for fabrication, welding prep, and general metalwork in commercial and industrial settings.

Key Features

• Reinforced aluminum oxide abrasive construction rated A36 for cutting steel and stainless steel
• Type 1 flat wheel profile for straight, controlled cuts on metal stock and pipe
• Resinoid bond provides consistent cut rate and wheel integrity under load
• 12,200 RPM maximum speed rating compatible with standard angle grinder operating speeds
• 5 inch diameter with 7/8 inch arbor hole fits common mid-size angle grinders
• Thin 1/16 inch kerf minimizes material loss and reduces heat buildup at the cut

Compatibility

Designed for use with angle grinders requiring a 5 inch diameter, 7/8 inch arbor cut-off wheel rated for steel and stainless steel applications.

Installation Notes

Mounting and replacement of cut-off wheels should be performed by qualified personnel following ANSI B7.1 and the grinder manufacturer guidelines. Always power down and unplug or lock out the grinder before changing wheels. Inspect the wheel for cracks or chips before mounting and never exceed the maximum RPM marked on the wheel. Eye protection, face shield, and appropriate PPE are required during operation.