WALTER Walter 8115568 Turning Insert CNMG432-MP5 WPP10G Carbide

Walter 8115568 Turning Insert CNMG432-MP5 WPP10G Carbide

Brand: WALTER
SKU: 8115568
Availability: In Stock

Ships same day if ordered by 12 pm

$35.90
$35.90
HAVE A QUESTION?

Our team is ready to help!

  • Voomi Supply

    Secure Payments

  • Voomi Supply

    Easy Returns

  • Voomi Supply

    Expert Advice

  • Voomi Supply

    Fast Shipping

Product Description

The WALTER 8115568 is a CNMG432-MP5 WPP10G grade carbide turning insert designed for general-purpose metal cutting on CNC lathes and turning centers. It features a multilayer CVD coating of Al2O3, TiCN, and TiN over a WPP10G carbide substrate, targeting steel and cast iron workpieces. The 80-degree diamond shape (ISO code C) provides a strong cutting geometry with a negative rake angle of 15 degrees and a chamfered and honed cutting edge for controlled chip formation. Four cutting edges are available per insert, maximizing cost efficiency per edge. The MP5 chip breaker geometry supports turning, facing, and boring operations across a range of depths of cut. Licensed machinists and CNC operators in production and job shop environments are the primary users.

This insert is suited for medium to finish turning applications on steel (ISO material group P) and cast iron (ISO material group K). The WPP10G grade corresponds to ISO material grade P10, making it well-matched for continuous to light interrupted cuts on carbon steels, alloy steels, and grey or ductile cast iron. Typical applications include shaft turning, facing operations on chucked parts, and boring in lathe or turning center setups. The neutral hand orientation allows use in standard right-hand toolholders with CNMG-style pockets. Both ANSI and ISO standard toolholder seating applies.

Key Features

  • Multilayer CVD coating: Al2O3, TiCN, and TiN for heat resistance and wear life on steel and cast iron
  • WPP10G grade carbide substrate, ISO material grade P10, optimized for steel cutting
  • 80-degree diamond insert shape with negative rake and chamfered and honed cutting edge for edge strength
  • MP5 chip breaker geometry supports turning, facing, and boring in a single insert style
  • Four usable cutting edges per insert with clamp and pin holding method
  • Conforms to ANSI and ISO standards; ISO designation CNMG120408-MP5 WPP10G

Compatibility

Designed for use in CNMG-style toolholders accepting a 432 insert size with clamp or pin holding. Compatible with standard ANSI and ISO CNMG toolholder pockets. Primary workpiece material is steel (ISO group P); secondary workpiece material is cast iron (ISO group K). Multi-use application covers turning, facing, and boring operations.

Installation Notes

Installation is performed by qualified machinists or CNC tooling technicians following standard insert indexing procedures. Power down and lock out the spindle before seating or indexing the insert. Ensure the toolholder pocket and seating surface are clean and free of chips before clamping. Verify clamp and pin engagement per toolholder manufacturer torque guidance; do not overtighten to avoid insert fracture.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Technical Specifications
Insert Style
CNMG
Industry Standard Number
CNMG432-MP5 WPP10G
ISO Code
CNMG120408-MP5 WPP10G
Manufacturer Grade
WPP10G
Material Grade
P10
Insert Material
Carbide
Coating Process
CVD
Coating Finish
Al2O3, TiCN, TiN (Multilayer)
Insert Shape
Diamond (80 degrees)
Insert Shape Code
C
Chip Breaker
MP5
Rake
Negative
Rake Angle
15 degrees
Relief Angle
0 degrees
Clearance Code
N
Tolerance Code
M
Cutting Edge Style
Chamfered and Honed
Insert Hand
Neutral
Number of Cutting Edges
4
Inscribed Circle
0.5000 inches (1/2 inch)
Insert Length
0.5080 inches
Insert Thickness
0.1875 inches (3/16 inch)
Corner Radius
0.0315 inches (1/32 inch)
Hole Diameter
0.2030 inches
Maximum Depth of Cut
0.5080 inches
Insert Size Code
432
Insert Holding Method
Clamp, Pin
Primary Workpiece Material
Steel (Code P)
Secondary Workpiece Material
Cast Iron (Code K)
Multi-Use Application
Turning, Facing, Boring
Standards
ANSI, ISO
Weight
0.2 pounds
Brand
WALTER
Manufacturer Part Number
8115568
WALTER Walter 8115568 Turning Insert CNMG432-MP5 WPP10G Carbide

Vendor: WALTER

Walter 8115568 Turning Insert CNMG432-MP5 WPP10G Carbide

$35.90

Vendor: WALTER

Walter 8115568 Turning Insert CNMG432-MP5 WPP10G Carbide

$35.90

Related Products

Customer Support Image

Need Support?

Call Jack and His Team