WALTER Walter 6944756 Turning Insert WNMG080408-RM5 WSM10S Carbide

Walter 6944756 Turning Insert WNMG080408-RM5 WSM10S Carbide

Brand: WALTER
SKU: 6944756
Availability: In Stock

Ships same day if ordered by 12 pm

$42.12
$42.12
HAVE A QUESTION?

Our team is ready to help!

  • Voomi Supply

    Secure Payments

  • Voomi Supply

    Easy Returns

  • Voomi Supply

    Expert Advice

  • Voomi Supply

    Fast Shipping

Product Description

The WALTER 6944756 is a solid carbide turning insert designated WNMG080408-RM5 in the WSM10S grade, part of the Tiger-tec Silver series. This trigon-shaped, 80-degree insert features a negative rake angle and a PVD-applied TiAlN/Al2O3/Al coating optimized for heat resistance and edge retention. With a 0.5-inch inscribed circle, a 1/32-inch corner radius, and six usable cutting edges, it is designed for high-productivity turning, facing, and boring operations on difficult-to-machine materials. The RM5 chip breaker geometry manages chip flow effectively in interrupted and continuous cuts. Licensed machinists and CNC operators are the primary end users of this insert.

This insert is engineered primarily for machining stainless steel and superalloys and titanium (ISO material codes M and S), with secondary suitability for steel (ISO code P). Material grades M1, S10, and P10 define its application range. The RM5 chip breaker geometry suits medium cutting depths up to 4.50 mm, making it appropriate for general turning and boring operations on CNC lathes and turning centers in both job-shop and production environments. It is held in place via clamp or pin-lock toolholders accepting WNMG-style inserts.

Key Features

  • PVD-coated TiAlN/Al2O3/Al multilayer for thermal stability and flank wear resistance in M and S workpiece materials
  • Six cutting edges per insert maximizes cost-per-edge value
  • RM5 chip breaker geometry controls chip curl at medium depths of cut up to 4.50 mm (0.177 inches)
  • Chamfered and honed cutting edge style balances edge strength and surface finish
  • Negative rake, 0-degree relief angle (clearance code N) compatible with rigid clamp and pin-lock toolholders
  • Meets ANSI and ISO dimensional standards; ISO code WNMG080408-RM5, ANSI equivalent WNMG432-RM5

Compatibility

Designed for use in WNMG-style clamp or pin-lock toolholders accepting a 1/2-inch inscribed circle trigon insert with a 0.203-inch hole diameter. Compatible with CNC lathes and turning centers configured for WNMG432 or WNMG080408 insert seats. No specific machine or toolholder model numbers were provided in the product data.

Installation Notes

Installation is performed by qualified machinists or CNC tooling technicians. Always index or replace inserts with the machine fully stopped and the spindle locked. Seat the insert fully against the pocket locating surfaces before engaging the clamp or pin lock to ensure proper support and prevent edge chipping. Verify toolholder torque specifications per the toolholder manufacturer's documentation, as insert pocket geometry and clamp style vary by holder design.

Technical Specifications
Insert Style
WNMG
ISO Code
WNMG080408-RM5 WSM10S
ANSI Equivalent
WNMG432-RM5 WSM10S
Insert Shape
Trigon (80-degree included angle)
Insert Material
Solid Carbide
Manufacturer Grade
WSM10S
Coating
TiAlN / Al2O3 / Al (PVD process)
Chip Breaker
RM5
Inscribed Circle
1/2 inch (0.5000 inches)
Corner Radius
1/32 inch (0.0315 inches / 0.80 mm)
Insert Length
8.69 mm (0.684 inches)
Insert Thickness
3/16 inch (0.1875 inches)
Hole Diameter
0.203 inches (5.16 mm)
Maximum Depth of Cut
4.50 mm (0.177 inches)
Rake Angle
20 degrees (Negative)
Clearance Code
N (0-degree relief)
Tolerance Code
M
Number of Cutting Edges
6
Insert Hand
Neutral
Cutting Edge Style
Chamfered and Honed
Primary Workpiece Material
Stainless Steel; Superalloys and Titanium (ISO M, S)
Secondary Workpiece Material
Steel (ISO P)
Material Grade
M1, S10, P10
Insert Holding Method
Clamp; Pin
Multi-Use Application
Turning, Facing, Boring
Standards
ANSI, ISO
Series
Tiger-tec Silver WNMG-RM5
Weight
0.01 pounds
Brand
WALTER
Manufacturer Part Number
6944756
WALTER Walter 6944756 Turning Insert WNMG080408-RM5 WSM10S Carbide

Vendor: WALTER

Walter 6944756 Turning Insert WNMG080408-RM5 WSM10S Carbide

$42.12

Vendor: WALTER

Walter 6944756 Turning Insert WNMG080408-RM5 WSM10S Carbide

$42.12

Related Products

Customer Support Image

Need Support?

Call Jack and His Team