Vlier SSC356 Swivel Pad Leveling Screw 3/4-10 Unc

Product Description

The VLIER SSC356 is a stainless steel swivel pad leveling screw designed for precision positioning and machine leveling applications in industrial and manufacturing environments. It features a 3/4-10 UNC thread with a 2-inch thread length and an overall length of 2.5 inches. The stainless steel swivel pad measures 0.625 inches in diameter and pivots up to 7.5 degrees, allowing the pad to conform to non-parallel or angled mounting surfaces without binding. This hardware is installed by millwrights, maintenance technicians, and machine builders who require reliable, corrosion-resistant leveling components.

The SSC356 suits industrial machine leveling, fixture positioning, and equipment mounting applications where surface contact must remain flush despite minor angular misalignment. The 3/8-inch hex key drive allows for straightforward adjustment in tight spaces. Stainless steel construction makes it appropriate for wash-down environments, food processing facilities, and other settings where corrosion resistance is a requirement.

Key Features

• Swivel pad pivots up to 7.5 degrees to compensate for non-parallel surfaces
• Full stainless steel construction for corrosion resistance in demanding environments
• 3/4-10 UNC thread standard for broad compatibility with standard leveling mounts
• 0.625-inch pad diameter provides stable surface contact
• 3/8-inch hex key drive allows adjustment in confined spaces
• Manufactured under ISO 9001 quality management standards

Compatibility

Designed as a standard UNC 3/4-10 threaded leveling screw suitable for industrial machine feet, leveling mounts, and fixture assemblies that accept this thread size and overall length.

Installation Notes

Installation is performed by millwrights or maintenance technicians using a 3/8-inch hex key. Ensure the mating threaded mount or foot is fully de-energized and load-free before adjusting or replacing leveling screws under equipment. Do not exceed the rated load capacity of the leveling mount assembly. Thread engagement should be sufficient to prevent stripping under operational loads.