Viega MEGAPGREDFTGP2122 Press Reducing Coupling 2.5x2 in

Product Description

The VIEGA MEGAPGREDFTGP2122 is a MegaPress press-fit reducing coupling designed for professional pipe joining in gas and fluid distribution systems. This carbon steel fitting connects 2-1/2 inch pipe to 2-inch pipe using a press connection on both ends, eliminating open-flame soldering or threading on the job. The fitting carries a 125 psi pressure rating for fuel gas applications and 200 psi for other fluid service. Rated for a temperature range of -40 degrees F to 180 degrees F, it suits a broad range of mechanical and gas piping environments. The nickel-plated and zinc-plated finish provides corrosion resistance in exposed or semi-exposed installations. Licensed plumbers and pipefitters are the typical installers.

This reducing coupling is used in residential and commercial mechanical piping systems where a pipe size reduction is required in-line. Common applications include natural gas distribution, fuel gas branch lines, and hydronic or industrial fluid piping built to SCH 40 or standard wall specifications. The press-fit end style allows fast, reliable connections without threading equipment or torches, making it suitable for retrofit work in occupied or gas-restricted environments where open flame is not permitted.

Key Features

• Press-fit connection on both ends - no flame, no threading required
• Rated 125 psi for fuel gas service and 200 psi for other fluid applications
• Temperature range of -40 degrees F to 180 degrees F
• Carbon steel construction with nickel and zinc plating for corrosion resistance
• SCH 40 and standard wall compatible
• Overall length of 4.96 inches

Compatibility

Designed as an OEM-style press-fit reducing coupling compatible with SCH 40 and standard wall carbon steel pipe in 2-1/2 inch by 2-inch nominal sizes, suitable for fuel gas and general fluid piping systems accepting MegaPress press-fit fittings.

Installation Notes

Installation must be performed by a licensed plumber or pipefitter in accordance with applicable local codes, IFGC requirements for fuel gas applications, and the press-tool manufacturer guidelines for jaw selection and pressing procedure. Shut off and depressurize the gas or fluid system completely before cutting into existing lines. Pipe ends must be cut square, deburred, and properly marked to confirm full insertion depth before pressing. Never press a fitting on a live or pressurized line.