Value Collection ZSNYD5-5-50PK Fork Terminal 50 Pack

Product Description

The VALUE COLLECTION ZSNYD5-5-50PK is a standard fork terminal designed for crimped wire terminations in electrical panels, control wiring, and equipment connections. It accepts wire sizes from 4.00 to 6.00 square millimeters and is rated for 600 volts. The terminal features a nylon, partially insulated barrel in yellow color coding for fast visual identification of wire gauge during installation. The copper contact ensures reliable conductivity at the stud connection point. This pack contains 50 terminals, making it a practical quantity for service technicians and panel builders working through multiple terminations in a single job.

These fork terminals are used in residential and light commercial electrical work, HVAC control wiring, motor starter panels, and general equipment hookups where a removable stud connection is needed. The size 10 stud opening allows quick attachment to terminal blocks, bus bars, and equipment lugs without removing the fastener. The partially insulated design provides protection at the barrel while keeping the fork exposed for installation. Electricians and HVAC technicians working under NEC guidelines commonly use this terminal style when terminating stranded copper conductors to screw-type stud connections.

Key Features

• Crimp connection type compatible with 4.00 to 6.00 square millimeter wire
• Rated 600 volts for use in standard low-voltage control and power wiring
• Nylon partial insulation in yellow for wire gauge color coding
• Copper contact material for reliable conductivity at the fork interface
• Size 10 stud opening (5.30 millimeters) fits common terminal block and equipment stud sizes
• Pack of 50 terminals for multi-point termination jobs

Compatibility

Designed as a standard crimp-style fork terminal for use with 4.00 to 6.00 square millimeter stranded copper conductors terminated to size 10 stud connections in electrical panels, control boards, and equipment wiring applications.

Installation Notes

Installation should be performed by a licensed electrician or qualified HVAC technician in accordance with applicable NEC requirements. De-energize and lock out the circuit before terminating or inspecting any wiring. Use a calibrated ratchet crimping tool rated for the terminal and wire size to achieve a secure, gas-tight crimp. Do not over-crimp or use an undersized tool, as this can damage the nylon insulation sleeve or deform the copper contact barrel.