Value Collection ZMSCVB75017 O-ring Dash 017 Viton 100 Pack

Product Description

The VALUE COLLECTION ZMSCVB75017 is a Dash 017 Viton (fluoroelastomer) O-ring designed for static and dynamic sealing applications across HVAC, plumbing, hydraulic, and industrial fluid systems. It measures 0.688 inches inside diameter, 0.813 inches outside diameter, and 0.0625 inches thick with a round cross-section. The fluoroelastomer compound delivers a hardness rating of 75 Shore A, making it a hard-grade seal suited for high-pressure environments. Its rated temperature range spans -15 degrees F to 400 degrees F, covering the thermal demands of most commercial and residential mechanical systems. Typically installed by HVAC technicians, plumbers, or industrial mechanics, this O-ring is sold in packs of 100.

This O-ring suits applications where petroleum-based fluids, fuels, lubricants, or hydraulic oils are present. The fluoroelastomer construction also makes it appropriate for vacuum service and situations requiring low gas permeability. Common install scenarios include refrigeration valve assemblies, hydraulic fittings, fuel system components, and general-purpose piping connections where elevated temperatures or chemical exposure would degrade standard nitrile or EPDM seals. The brown color is standard for Viton-compound O-rings and helps distinguish material type during service.

Key Features

• Fluoroelastomer (Viton) material with good resistance to petroleum products and wide chemical compatibility
• Rated from -15 degrees F to 400 degrees F for high-temperature service
• 75 Shore A hardness (hard grade) for low compression set in pressurized applications
• Suitable for vacuum service and offers low gas permeability
• Round cross-section, Dash 017 designation for standard sizing compatibility
• Pack quantity of 100 units minimizes reorder frequency for service fleets and shop stock

Compatibility

Designed as an OEM-style replacement or service O-ring for systems and assemblies requiring a Dash 017 fluoroelastomer seal rated for petroleum products and high-temperature service. Compatible material types include petroleum-based fluids and hydraulic oils as noted in the product specifications.

Installation Notes

Power down or de-energize the system and relieve all fluid or gas pressure before replacing any O-ring. Lubricate the O-ring lightly with a compatible fluid or O-ring lubricant before seating to prevent tearing during assembly. Avoid rolling, twisting, or using sharp tools that can nick the sealing surface. Installation should follow applicable codes such as IFGC or IPC for gas and plumbing applications, and NEC guidelines where the seal is used in electrical enclosures with fluid exposure.