Value Collection ZMSCVB75014 Viton O-ring Dash 014

Product Description

The VALUE COLLECTION ZMSCVB75014 is a Dash 014 Viton fluoroelastomer O-ring designed for static and dynamic sealing applications where high heat and chemical exposure are primary concerns. With a 0.5-inch inside diameter, 0.625-inch outside diameter, and a 0.0625-inch cross-section thickness, this round-profile O-ring fits standard Dash 014 grooves. The fluoroelastomer compound delivers a Shore A hardness of 75, a working temperature range of -15 to 400 degrees F, and low gas permeability — making it well suited for vacuum service as well as high-pressure fluid and gas circuits. Each package contains 100 O-rings.

This O-ring is used in HVAC, plumbing, hydraulic, pneumatic, and industrial fluid-handling applications where petroleum-based fluids, fuels, oils, or elevated temperatures would degrade standard nitrile or EPDM seals. Typical installations include valve stems, pump shafts, fitting connections, manifold ports, and refrigeration service ports. The brown fluoroelastomer compound is a standard choice when a wide spectrum of chemical compatibility is required. Licensed HVAC technicians, pipefitters, and industrial maintenance mechanics routinely stock Dash 014 Viton O-rings as service replacements.

Key Features

• Fluoroelastomer (Viton-type) compound rated from -15 to 400 degrees F
• Shore A hardness of 75 — classified as hard — for low compression set under sustained load
• Low gas permeability makes this suitable for vacuum service applications
• Broad chemical compatibility including petroleum products, fuels, and hydraulic fluids
• Round cross-section profile conforms to Dash 014 standard groove dimensions
• Packaged in quantities of 100 for shop stock and service van inventory

Compatibility

Designed as a standard Dash 014 O-ring replacement for any groove or fitting machined to Dash 014 specifications. Compatible with petroleum products and systems requiring resistance to high temperatures or broad chemical exposure.

Installation Notes

Power down or depressurize the system fully before removing any fitting, valve, or component that retains this O-ring. Apply a thin film of the appropriate system fluid or O-ring lubricant compatible with fluoroelastomer to ease installation and reduce the risk of tearing the seal. Do not roll or twist the O-ring into the groove — seat it evenly to prevent spiral failure. Follow applicable system pressure ratings and relevant codes such as ASME B31.3 or IFGC when reinstalling connections in gas or refrigerant circuits.