Value Collection ZMSCV70213 Viton O-ring Dash 213 100 Pack

Product Description

The VALUE COLLECTION ZMSCV70213 is a Dash 213 Viton (fluoroelastomer) O-ring with a round cross section, designed for static and dynamic sealing applications in systems that handle petroleum products, fuels, hydraulic fluids, and high-temperature media. It measures 0.921 inches inside diameter, 1.188 inches outside diameter, and 0.125 inches thick. The fluoroelastomer compound delivers a Shore A hardness of 70, making it suitable for demanding sealing environments where compression set resistance and chemical compatibility are critical. Licensed HVAC technicians, plumbers, and hydraulic system technicians commonly use this size for service and repair work.

This O-ring is well suited for residential and commercial HVAC, plumbing, refrigeration, and fluid-handling equipment where petroleum-based fluids or high operating temperatures are present. Its rated working temperature range of -15 degrees F to 400 degrees F covers most heating, cooling, and fuel-system service scenarios. The Dash 213 designation is a standard sizing reference used across a wide range of OEM and aftermarket sealing applications, simplifying cross-referencing during service calls. Supplied in a pack of 100, it supports shop-stock restocking and high-volume service operations.

Key Features

• Fluoroelastomer (Viton) compound offers good resistance to petroleum products, fuels, and hydraulic fluids
• Working temperature range: -15 degrees F to 400 degrees F
• Shore A hardness of 70 with a hard hardness rating for low compression set under sustained load
• Low gas permeability and suitable for vacuum service applications
• Wide spectrum of chemical compatibility including petroleum products
• Round cross section with standard Dash 213 sizing for straightforward cross-referencing

Compatibility

Designed as a standard Dash 213 replacement O-ring for use in HVAC, plumbing, refrigeration, and fluid-handling equipment that requires a fluoroelastomer seal compatible with petroleum products and high-temperature service.

Installation Notes

Installation should be performed by a qualified technician following applicable codes such as NEC or IFGC where relevant to the system being serviced. De-energize or depressurize the system before removing the old O-ring, and inspect the seating groove for damage or debris prior to installing the new seal. Apply a compatible lubricant to the O-ring during installation to prevent tearing and ensure even seating. Do not use petroleum-based lubricants in systems where incompatibility with other materials may be a concern.