Value Collection ZMSCV70006 Viton O-ring Dash 006 Pack 100

Product Description

The VALUE COLLECTION ZMSCV70006 is a Dash 006 Viton (fluoroelastomer) O-ring used as a static or dynamic seal in fluid and gas systems across HVAC, plumbing, hydraulic, and industrial service applications. It measures 0.125 inches inside diameter, 0.250 inches outside diameter, and 0.0625 inches thick with a round cross section. The compound carries a Shore A hardness of 70, placing it in the hard rating category. Rated from -15 degrees F to 400 degrees F, this O-ring handles the temperature range common in refrigeration service valves, fuel systems, and high-temperature hydraulic circuits. Licensed trades and maintenance technicians install these during equipment rebuild, valve service, and fitting replacement.

This O-ring is suited for sealing applications where exposure to petroleum products, fuels, oils, and a wide spectrum of chemicals is expected. The fluoroelastomer compound offers low gas permeability, making it appropriate for vacuum service and refrigerant-side applications where seal integrity is critical. It is sold in a package quantity of 100, making it practical for shop stock in HVAC service vans, plumbing supply rooms, and industrial maintenance departments. The Dash 006 designation is a standard AS568 sizing reference used across multiple industries for consistent cross-referencing.

Key Features

• Fluoroelastomer (Viton-type) compound rated to 400 degrees F maximum working temperature
• Low minimum working temperature of -15 degrees F for cold-environment service
• Shore A hardness of 70 for reliable compression sealing with low compression set
• Good resistance to petroleum products, fuels, and a wide range of chemicals
• Low gas permeability makes it suitable for vacuum service and refrigerant-side sealing
• Round cross section in standard Dash 006 (AS568) sizing for broad cross-reference compatibility
• Packaged in quantities of 100 to support shop stock and fleet service operations

Compatibility

Designed as a standard Dash 006 AS568-size O-ring for use in any system or component that specifies a Dash 006 fluoroelastomer seal with 0.125 inches ID, 0.250 inches OD, and 0.0625 inches cross-section thickness. Compatible materials include petroleum products and petroleum-based fluids per manufacturer specification.

Installation Notes

O-rings should be installed by qualified technicians following the equipment manufacturer's assembly procedures. Always depressurize, de-energize, and purge the system of fluid or refrigerant before replacing any O-ring seal. Lubricate the O-ring with a compatible lubricant prior to installation to prevent rolling or tearing during assembly. Do not reuse O-rings that have been removed from service; inspect the sealing groove for scoring or contamination before installing a new seal.