Value Collection ZMSCV70005 Viton O-ring Dash 005

Product Description

The VALUE COLLECTION ZMSCV70005 is a Dash 005 Viton fluoroelastomer O-ring with a round cross section, designed for static and dynamic sealing applications across HVAC, plumbing, and fluid-handling systems. It measures 0.0937 inches inside diameter, 0.2187 inches outside diameter, and 0.0625 inches thick. The fluoroelastomer compound carries a Shore A hardness of 70 and is rated for service from -15 degrees F to 400 degrees F. Licensed plumbers, HVAC technicians, and mechanical contractors install these seals wherever a small-diameter, high-temperature-resistant O-ring is required in petroleum-fluid or chemical-exposure environments.

This O-ring is suited for use in residential and light commercial applications where exposure to petroleum products, hydraulic fluids, fuels, or elevated temperatures is expected. The Dash 005 designation makes it a standard size recognized across valve bodies, fittings, and fluid-control components in refrigeration, plumbing, and general mechanical assemblies. It is sold in a package quantity of 100, making it practical for service shops and supply-room stock. The black color and round cross section simplify visual inspection and groove fitment verification during installation.

Key Features

• Fluoroelastomer (Viton) material provides good resistance to petroleum products and wide chemical compatibility
• Rated -15 degrees F to 400 degrees F continuous service temperature range
• Shore A hardness of 70 for a firm seal with low compression set
• Suitable for vacuum service and exhibits low gas permeability
• Round cross section in standard Dash 005 size for broad fitment across common groove dimensions
• Sold in a 100-piece package for bench stock and service fleet use

Compatibility

Designed as an OEM-style replacement or service-stock O-ring for applications requiring a Dash 005 round-cross-section fluoroelastomer seal compatible with petroleum products and high-temperature environments.

Installation Notes

Installation should be performed by a licensed plumber, HVAC technician, or qualified mechanical contractor. De-energize and depressurize the system fully before removing any fitting or valve assembly. Lightly lubricate the O-ring with a compatible fluid before seating it in the groove to avoid twisting or nicking the seal. Inspect the groove for scoring or debris before installation, as surface damage is a leading cause of seal failure.