Value Collection ZMSCU70114 O-ring Dash 114 Polyurethane 10-pack

Product Description

The VALUE COLLECTION ZMSCU70114 is a Dash 114 polyurethane O-ring designed for sealing applications in fluid and pneumatic systems. With a 0.625-inch inside diameter, a 0.813-inch outside diameter, and a 0.094-inch cross-section thickness, this round-profile ring fits standard Dash 114 grooves. The material is polyurethane at a 70 Shore A hardness rating, offering resistance to petroleum oils, hydrocarbon fuels, oxygen, ozone, and general weathering. It is sold in a package of 10 rings. Licensed plumbers, HVAC technicians, and hydraulic system mechanics are the typical installers of this component.

This O-ring is suited for use in residential and light commercial fluid-handling systems where petroleum-based oils or hydrocarbon fuels are present. Typical applications include hydraulic fittings, fuel line connections, pneumatic valve stems, and pump seal assemblies. It is rated for service between -60 degrees F and 200 degrees F, making it appropriate for a wide range of operating environments. Note that this O-ring is not recommended for use with acids, ketones, or chlorinated hydrocarbons. Some polyurethane formulations may also be sensitive to water and humidity exposure.

Key Features

• Dash 114 standard sizing: 0.625 inches ID, 0.813 inches OD, 0.094 inches cross-section thickness
• Polyurethane construction at 70 Shore A hardness for firm, durable sealing
• Rated from -60 degrees F to 200 degrees F continuous service temperature
• Resistant to petroleum oils, hydrocarbon fuels, oxygen, ozone, and weathering
• Round cross-section profile for consistent groove seating
• Packaged in quantities of 10 rings per order

Compatibility

Designed as an OEM-style replacement or service seal for any standard Dash 114 O-ring groove application in petroleum oil and hydrocarbon fuel service environments. Not compatible with acid, ketone, chlorinated hydrocarbon, or sustained high-humidity applications.

Installation Notes

Depressurize and de-energize the system completely before replacing any O-ring seal. Inspect the groove and mating surfaces for nicks, burrs, or corrosion that could compromise the seal. Lubricate the O-ring with a compatible petroleum-based assembly lubricant before installation to reduce the risk of tearing during seating. Follow applicable plumbing or mechanical codes for the system type being serviced.