Value Collection ZMSCS70FDA213 Silicone O-ring Dash 213 25 Pack

Product Description

The VALUE COLLECTION ZMSCS70FDA213 is a Dash 213 silicone o-ring with a round cross section, sold in a package of 25. It measures 15/16 inches inside diameter, 1-3/16 inches outside diameter, and 1/8 inches thick. Made from red silicone with a Shore A hardness of 70, this o-ring is FDA compliant and engineered for applications that demand a wide service temperature range from -80 degrees F to 450 degrees F. Licensed plumbers, HVAC technicians, and maintenance professionals use these seals where standard elastomers fail due to extreme heat, cold, or outdoor exposure.

This o-ring is well suited for food processing equipment, HVAC systems, industrial machinery, and outdoor installations where ozone and weather resistance are required. The silicone compound offers good dry heat resistance and performs across a broad thermal range, making it a dependable choice for both high-temperature and low-temperature sealing scenarios. Limited oil resistance should be considered when selecting this part for fluid-handling applications involving petroleum-based media.

Key Features

• FDA compliant silicone material suitable for food-contact and sanitary applications
• Service temperature range of -80 degrees F to 450 degrees F for extreme environments
• Good weather and ozone resistance for outdoor or exposed installations
• Shore A hardness of 70 rated as hard for reliable compression sealing
• Round cross section with consistent 0.1250 inch thickness for standard groove fitment
• Sold in a package of 25 units to support service stock and multi-unit jobs

Compatibility

Designed as a standard Dash 213 o-ring replacement for any groove or fitting calling out a 15/16 inches ID by 1-3/16 inches OD by 1/8 inches cross-section silicone seal per common dimensional standards.

Installation Notes

Power down or depressurize the system completely before removing the old o-ring and installing the replacement. Clean the mating groove of debris and inspect for damage before seating the new o-ring. Avoid using sharp tools that can nick the sealing surface or the o-ring itself. Installation of seals in pressurized fluid or gas systems should follow applicable codes and be performed by a qualified tradesperson.