Value Collection ZMSCS70FDA006 Silicone O-ring Dash 006

Product Description

The VALUE COLLECTION ZMSCS70FDA006 is a Dash 006 silicone O-ring with a round cross section, rated at 70 Shore A hardness and manufactured from FDA-compliant silicone material. It measures 0.125 inches inside diameter, 0.250 inches outside diameter, and 0.0625 inches thick (1.78 mm). The wide operating temperature range of -80 degrees F to 450 degrees F makes this O-ring suited for demanding sealing applications where dry heat resistance and thermal cycling are primary concerns. Plumbers, HVAC technicians, and maintenance mechanics install this type of static seal in valves, fittings, and fluid system components.

This O-ring is appropriate for residential and commercial plumbing, HVAC, and food-service equipment applications where FDA-compliant sealing materials are required. The silicone compound provides good weather and ozone resistance and performs reliably across a wide temperature range. It is particularly well suited for dry-heat environments. Note that silicone offers limited oil resistance, so it should not be specified in continuous petroleum-fluid contact without verifying compatibility. This SKU ships in a package quantity of 100.

Key Features

• FDA-compliant silicone material suitable for food-service and sanitary applications
• Operating temperature range of -80 degrees F to 450 degrees F
• 70 Shore A hardness rated Hard for positive sealing under compression
• Good weather and ozone resistance for outdoor and exposed installations
• Round cross section for standard O-ring groove fitment
• Package quantity of 100 units per order

Compatibility

Designed as a Dash 006 O-ring replacement for valves, fittings, and fluid system components requiring a 0.125-inch ID silicone seal with FDA-compliant material.

Installation Notes

Installation is typically performed by licensed plumbers, HVAC technicians, or qualified maintenance personnel. Shut off the fluid system and relieve all pressure before removing or installing O-rings. Lubricate the O-ring with a compatible, system-appropriate lubricant during assembly to prevent tearing or improper seating. Because silicone has limited oil resistance, verify chemical compatibility with the process fluid before installation in petroleum or hydrocarbon service.