Value Collection ZBDMP9972 O-ring Dash 007 Nbr

Product Description

The VALUE COLLECTION ZBDMP9972 is a Dash 007 O-ring with a round cross section, manufactured from Nitrile Butadiene Rubber (NBR). It measures 0.156 inches inside diameter, 0.281 inches outside diameter, and 0.0625 inches thick. With a Shore A hardness of 70 and a working temperature range of -40 degrees F to 275 degrees F, this O-ring is suited for sealing applications where resistance to petroleum-based fluids, hydraulic oils, and fuels is required. Plumbers, HVAC technicians, and mechanical service professionals install this type of seal in fittings, valves, and threaded connections across a range of fluid-handling systems.

This O-ring is appropriate for use in residential and light commercial plumbing, HVAC, and refrigeration systems where small-bore sealing is required. The Dash 007 designation identifies it within the AS568 standard sizing series, making it straightforward to cross-reference for replacement or repair work. Typical installation scenarios include valve stem seals, fitting face seals, and small-bore port connections. It is sold individually, with a minimum order quantity of 20 units.

Key Features

• Dash 007 AS568 standard size: 0.156 inches ID, 0.281 inches OD, 0.0625 inches thick
• Nitrile Butadiene Rubber (NBR) construction offers resistance to petroleum-based fluids and hydraulic oils
• Shore A hardness of 70 for reliable compression sealing in standard-duty applications
• Operating range of -40 degrees F to 275 degrees F covers most HVAC and plumbing service conditions
• Round cross section ensures consistent seating in standard O-ring grooves

Compatibility

Designed as a standard Dash 007 NBR O-ring suitable for use in fittings, valves, and port connections that accept AS568 Dash 007 seals in petroleum-fluid, hydraulic, and general-purpose fluid-handling applications.

Installation Notes

Installation is performed by plumbers, HVAC technicians, or mechanical service professionals. Always depressurize and drain the system before replacing O-ring seals. Lubricate the O-ring lightly with a compatible fluid or grease prior to installation to prevent tearing during assembly. Inspect the mating groove for nicks, burrs, or debris before seating the new seal.