Value Collection ZBD9500-216 O-ring Dash 216 Viton

Product Description

The VALUE COLLECTION ZBD9500-216 is a Viton O-ring with a round cross section, sized at 1-1/8 inches inside diameter, 1-3/8 inches outside diameter, and 1/8 inch thickness. Viton fluoroelastomer construction gives this O-ring a broad service temperature range of -15 degrees F to 400 degrees F, making it suitable for high-heat and chemically aggressive environments. The Dash 216 designation follows the AS568 standard sizing convention, allowing straightforward cross-referencing across seal catalogs. Licensed plumbers, pipefitters, HVAC technicians, and industrial maintenance trades rely on this type of seal for fluid and gas containment in fittings, valves, and flanged connections.

This O-ring is suited for static and dynamic sealing applications across residential and commercial plumbing, HVAC, hydraulic, and pneumatic systems. Its Viton material resists degradation from petroleum-based fluids, hydraulic oils, and many industrial chemicals, making it a practical choice anywhere rubber seals face elevated temperatures or aggressive media. Hardness is rated at 75 Shore A, placing it in the hard category for applications that require minimal compression set under sustained load.

Key Features

• Viton fluoroelastomer construction for resistance to heat, oil, and chemical exposure
• Operating temperature range from -15 degrees F to 400 degrees F
• Dash 216 sizing per AS568 standard for easy cross-referencing
• 75 Shore A hardness rating suitable for demanding sealing environments
• Round cross section for consistent compression and seating across groove types

Compatibility

Designed as a standard Dash 216 O-ring replacement for use in any groove machined to AS568 Dash 216 dimensions across plumbing, HVAC, hydraulic, and pneumatic applications.

Installation Notes

Installation should be performed by a qualified tradesperson following applicable plumbing, mechanical, or hydraulic codes. Depressurize and drain the system before removing or replacing any seal. Inspect the groove for burrs or damage that could compromise the seal before installing the O-ring. Apply a compatible lubricant to ease installation and prevent rolling or tearing during assembly.