Value Collection XNB09065 Black Pipe Nipple 2in X 6.5in Sch 80

Product Description

The VALUE COLLECTION XNB09065 is a Schedule 80 black steel pipe nipple designed for use in high-pressure and industrial piping systems. Measuring 2 inches in diameter and 6.5 inches in length, this nipple features threaded ends on both sides conforming to ANSI B1.20.1 and ASME B1.20.1 standards. Constructed from seamless or welded steel meeting ASTM A106 and ASTM A53 specifications, it delivers the wall thickness and pressure rating required in demanding plumbing, mechanical, and industrial applications. Licensed plumbers and pipefitters install this part in black iron piping systems for gas, steam, and water service.

This pipe nipple is suited for residential and commercial gas piping, steam systems, compressed air lines, and general mechanical piping where Schedule 80 wall thickness is specified. The 2-inch diameter and 6.5-inch body length make it a common close-to-medium connector between fittings, valves, or equipment ports. It is used wherever NPT-threaded black iron pipe connections are required and a lead-free, code-compliant component is needed to meet project specifications.

Key Features

• Schedule 80 wall thickness for elevated pressure ratings compared to Schedule 40
• Threaded on both ends per ANSI B1.20.1 and ASME B1.20.1 for standard NPT fitment
• Seamless and welded construction meets ASTM A106 and ASTM A53 standards
• Lead-free construction for compliance with applicable plumbing codes
• 2-inch nominal pipe size with 2-inch outside diameter
• Black steel finish suitable for gas, steam, and mechanical piping service

Compatibility

Designed as a standard NPT-threaded black iron pipe nipple compatible with 2-inch Schedule 80 fittings, valves, and couplings in gas, steam, compressed air, and general mechanical piping systems.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable local codes, the International Fuel Gas Code (IFGC), or the International Plumbing Code (IPC) as required by application. Shut off and depressurize the line before threading or removing any components. Apply an approved thread sealant or PTFE tape rated for the service medium to all NPT connections before assembly. Do not over-torque threaded connections; follow fitting manufacturer guidelines for proper joint assembly.