Value Collection WS-PL-SCB200025 Cartridge Filter 25 Micron

Product Description

The VALUE COLLECTION WS-PL-SCB200025 is a melt-blown, thermally bonded polypropylene cartridge filter designed to reduce sediment in residential and light commercial plumbing systems. With a 25-micron rating, this filter traps particulate matter including sand, rust, and fine silt before it reaches downstream fixtures, valves, or equipment. The filter measures 20 inches in length with a 2.48-inch outside diameter, accommodates flow rates up to 8 gallons per minute (GPM), and is rated to a maximum of 60 psi working pressure. Plumbers and water treatment technicians install this type of filter in standard whole-house or point-of-entry filter housings as part of routine water quality maintenance.

This cartridge is suited for sediment pre-filtration in residential water supply lines, well water systems, and light commercial applications where particulate contamination is a concern. It performs within a maximum working temperature of 176 degrees F, making it appropriate for cold and warm water service lines. The all-polypropylene construction — both media and core — makes it compatible with treated municipal water and untreated well water sources where sediment reduction is the primary treatment goal.

Key Features

• 25-micron melt-blown polypropylene media for effective sediment reduction
• Maximum flow rate of 8.00 GPM supports whole-house and point-of-entry applications
• Rated to 60 psi maximum working pressure
• Maximum working temperature of 176 degrees F
• Full polypropylene construction — media and core — for broad chemical compatibility
• 20-inch length fits standard 20-inch big-blue and slim-line filter housings

Compatibility

Designed as an OEM-style replacement cartridge for standard 20-inch plumbing sediment filter housings accepting a 2-1/2-inch outside diameter cartridge.

Installation Notes

Installation and replacement of cartridge filters should be performed by a licensed plumber or qualified water treatment technician. Always shut off the water supply and relieve system pressure before opening the filter housing. Inspect housing O-rings for wear or damage and replace as needed before seating the new cartridge. Follow local plumbing codes, including applicable IPC requirements, when integrating filter assemblies into potable water lines.