Value Collection WS-MH-SLNG1-292 Lifting Sling 3.2 Ton

Product Description

The VALUE COLLECTION WS-MH-SLNG1-292 is a 2-ply flat eye-and-eye lifting sling rated for 3.2 tons in a vertical hitch configuration. At 8 feet long and 2 inches wide, this silver sling is sized for medium-duty rigging tasks in industrial, construction, and maintenance environments. The 2-ply construction distributes load across the sling body, reducing stress concentration at contact points. Rigging professionals and millwrights rely on this type of sling for lifting structural components, machinery, and fabricated assemblies where a flat, wide bearing surface is needed to protect the load.

This sling is suited for use in single-leg vertical lifts and can also serve as a component in multi-leg rigging arrangements when matched with appropriate hardware. Typical applications include shop fabrication, equipment installation, and material handling on job sites where a durable, fixed-length flat sling is preferred over wire rope or chain. At 2.38 pounds, the sling is lightweight enough for one-person handling and field transport.

Key Features

• 3.2 ton vertical hitch capacity for medium-duty rigging
• 8 foot length suits a wide range of lift geometries
• 2 inch width with 2-ply construction distributes load and protects load surfaces
• Silver color for easy visual identification in the field
• Lightweight at 2.38 pounds for easy handling and transport

Compatibility

Designed as a standard flat lifting sling for use with compatible hooks, shackles, and rigging hardware rated at or above the sling working load limit. Confirm that all connected hardware meets or exceeds the 3.2 ton vertical capacity before use.

Installation Notes

Rigging and lifting operations should be performed by qualified riggers following ASME B30.9 standards for slings. Inspect the sling for cuts, abrasion, UV degradation, or deformation before each lift and remove from service if damage is found. Never exceed the rated working load limit for the hitch configuration in use, and avoid sharp edges on the load without protective padding. Confirm all rigging connections are fully seated and load is balanced before beginning any lift.