Value Collection WS-MH-SLNG1-111 Web Sling 8 Ft 3200 Lb

Product Description

The VALUE COLLECTION WS-MH-SLNG1-111 is a single-ply polyester web sling rated for vertical lifting applications in rigging and material handling operations. At 8 feet in length and 1 inch in width, this sling carries a vertical capacity of 3,200 pounds and a choker capacity of 1,250 pounds. Weighing approximately 0.81 pounds, it is a lightweight solution suited for frequent use in shop, warehouse, and field lifting scenarios. Riggers and millwrights select flat web slings like this one where load contact protection and ease of storage are priorities over wire rope or chain alternatives.

This sling is appropriate for single-leg vertical and choker hitch configurations in light to moderate rigging tasks. Typical applications include lifting steel components, machinery, lumber bundles, and similar loads in residential construction, commercial jobsites, and industrial facilities. Its compact 1-inch width allows use in confined or close-clearance lift points where wider slings are impractical. Single-ply construction keeps weight and bulk low for technicians handling multiple lifts per shift.

Key Features

• 3,200 lb vertical capacity for single-leg lifts
• 1,250 lb choker capacity for wrapped-hitch configurations
• 8-foot usable length accommodates a range of load heights and rigging setups
• 1-inch width fits narrow shackles, hooks, and tight lift points
• Single-ply construction reduces sling weight to 0.81 pounds for easy handling

Compatibility

Designed as a standard flat web sling for use with compatible rigging hardware including hooks, shackles, and lifting beams rated at or above the sling working load limit.

Installation Notes

Web slings must be inspected before each use for cuts, abrasions, chemical damage, heat distortion, and broken stitching — remove from service immediately if any defect is found. Never exceed the rated working load limit for the hitch type in use; choker and basket configurations carry different capacities than vertical. Rigging work should be performed by qualified personnel in accordance with ASME B30.9 standards. Protect the sling from sharp edges using edge guards where load contact could cut or abrade the webbing.