Value Collection WS-MH-CHN-106 Welded Alloy Chain Grade 80

Product Description

The VALUE COLLECTION WS-MH-CHN-106 is a 5/8-inch welded alloy chain rated for a working load of 18,100 pounds at Grade 80, supplied in a 150-foot coil and priced in 1-foot increments. Each link is finished in black cataphoresis coating, which provides corrosion resistance for demanding indoor and outdoor lifting and rigging applications. The chain is constructed from alloy steel with welded links, meeting Grade 80 standards for overhead lifting. With an inside width of 0.925 inches and an inside length of 1.89 inches, the links are sized to interface with standard Grade 80 hooks, shackles, and lifting hardware. This chain is installed and rigged by qualified riggers, millwrights, and industrial maintenance professionals.

This chain is suited for overhead lifting, load securement, rigging, and tie-down applications in industrial, construction, and warehousing environments. It is appropriate for use with Grade 80 fittings and hardware. The 150-foot coil length allows job-site cutting to required lengths. The minimum order quantity is 10 feet, and the product is priced per 1-foot increment. Applicable for both residential and commercial construction rigging as well as heavy industrial material handling where a Grade 80 rated chain is specified.

Key Features

• Grade 80 alloy steel construction with an 18,100-pound working load capacity
• 5/8-inch chain size with 0.925-inch inside width and 1.89-inch inside length per link
• Black cataphoresis finish for corrosion resistance in harsh environments
• Welded links for consistent load distribution and strength
• Supplied as a 150-foot coil, priced per 1-foot increment with a 10-foot minimum order
• UNSPSC Code 31151600 for procurement and catalog classification

Compatibility

Designed for use with standard Grade 80 lifting and rigging hardware including hooks, shackles, and master links sized for 5/8-inch chain. Consult fitting manufacturer specifications to confirm compatibility before use in overhead lifting applications.

Installation Notes

Overhead lifting applications require inspection, rigging, and signoff by a qualified rigger in accordance with applicable ASME B30 and OSHA standards. Always verify that all connecting hardware is rated at or above the chain working load limit before use. Inspect each link for deformation, cracks, or wear before every lift, and remove the chain from service immediately if damage is found. Never exceed the rated working load limit or use the chain in applications for which it is not rated.