Value Collection WS-MH-CHN-041 Proof Coil Chain 63 Ft

Product Description

The VALUE COLLECTION WS-MH-CHN-041 is a Grade 30 welded proof coil chain rated for 2,650 pounds working load capacity. At 63 feet in length, it is manufactured to proof coil standards, meaning each link is tested to verify structural integrity before leaving the factory. The zinc-plated finish provides a base level of corrosion resistance suitable for general-purpose indoor and outdoor applications. This chain is a standard utility chain used across rigging, towing, load securement, and general material handling tasks by tradespeople, fleet maintenance crews, and construction professionals.

This chain is suited for a wide range of light-to-medium duty applications including trailer tie-down, equipment anchoring, load binding, and logging. At 3/8 inch nominal link diameter and Grade 30 construction, it meets common requirements for general utility and agricultural use. The 63-foot length provides flexibility for longer runs without splicing. It is not rated for overhead lifting — overhead lifting applications require Grade 80 or higher alloy chain.

Key Features

• Grade 30 proof coil construction with 2,650 lb working load capacity
• 63-foot overall length suits extended tie-down and anchoring runs
• 3/8 inch nominal link diameter with 0.571 inch inside width and 1.359 inch inside length
• Zinc-plated finish provides corrosion resistance for general-purpose outdoor use
• Welded links tested to proof coil standards for consistent link integrity
• Not rated for overhead lifting — general utility and load securement use only

Compatibility

Designed as a general-purpose Grade 30 proof coil chain compatible with standard 3/8 inch chain hardware including grab hooks, slip hooks, clevis hooks, and load binders rated for Grade 30 chain.

Installation Notes

Inspect all connecting hardware — hooks, shackles, and binders — to confirm they are rated for Grade 30 chain and a minimum 2,650 lb working load before use. Never exceed the stated working load capacity and never use this chain for overhead lifting. When used for vehicle towing or load securement, comply with applicable DOT securement regulations and verify that anchor points meet or exceed the chain rating. Periodically inspect links for deformation, wear, cracks, or corrosion and remove from service if any defects are found.