Value Collection WS-MH-CHN-024 Welded Proof Coil Chain

Product Description

The VALUE COLLECTION WS-MH-CHN-024 is a Grade 30 welded proof coil chain supplied in a 200-foot coil and sold in 1-foot increments with a minimum order of 10 feet. Each link is welded for consistent strength throughout the run. The chain carries a working load capacity of 2,650 pounds and features a self-colored finish, meaning it retains the natural steel surface without paint or plating. At 3/8 inch nominal diameter, it fits standard hooks, shackles, and grab hooks rated for Grade 30 stock. Licensed riggers, general contractors, and trade professionals use this chain for light-to-medium-duty tie-down, load securement, and general material handling applications.

This proof coil chain is suited for residential and commercial jobsite use where a reliable, economical chain is required for blocking, bundling, towing, or anchoring tasks. The 200-foot coil format allows field cutting to custom lengths, making it practical for shops and service fleets that need varying run lengths on demand. The 3/8 inch size is one of the most common nominal diameters stocked in trade and rigging supply environments.

Key Features

• 2,650-pound working load capacity rated at Grade 30
• 3/8 inch nominal chain diameter with 0.571-inch inside width and 1.359-inch inside length per link
• Welded links for consistent load distribution along the full length
• Self-colored finish — bare steel, no coating to chip or flake in field conditions
• 200-foot total coil length sold in 1-foot increments, minimum order 10 feet
• Lightweight per-foot weight supports easy handling and field cutting

Compatibility

Designed as a standard Grade 30 proof coil chain compatible with 3/8 inch-rated hooks, shackles, grab hooks, and tensioners that conform to Grade 30 load ratings.

Installation Notes

Installation and rigging should be performed by qualified personnel familiar with applicable ASME B30 rigging standards and OSHA load securement requirements. Never exceed the rated working load capacity of 2,650 pounds, and always inspect links for deformation, cracks, or corrosion before each use. Use chain cutters or an angle grinder to cut to length in the field — never use flame cutting, as heat degrades the link integrity. Retire any section of chain that shows elongated, bent, or cracked links.