Value Collection WS-MH-CHN-022 Welded Proof Coil Chain

Product Description

The VALUE COLLECTION WS-MH-CHN-022 is a Grade 30 welded proof coil chain sold in 1-foot increments from a 200-foot total coil. At 1/4 inch nominal diameter, it carries a 1,300-pound working load and ships with a self-colored finish — no coating, no plating, bare steel ready for field use. Grade 30 proof coil is the standard general-purpose chain classification, suitable for towing, securing loads, and light overhead applications where higher-grade alloy chain is not required. Each foot weighs approximately 0.65 pounds, making it straightforward to estimate weight for longer runs.

This chain is used across industrial, agricultural, marine, and construction applications where a reliable, code-standard low-carbon steel chain is needed. Common uses include log chains, tow chains, load binders, binder assemblies, anchor lines, and general tie-down work. The 200-foot coil allows purchasers to cut custom lengths on-site. The minimum order quantity is 50 feet, priced per 1-foot increment, so orders must be placed in multiples of 50 feet up to the full coil length.

Key Features

• Grade 30 proof coil construction — meets standard general-purpose chain classification
• 1,300-pound working load capacity at 1/4 inch nominal diameter
• Self-colored finish — bare steel, no additional coating or plating
• Sold per linear foot from a 200-foot coil, minimum order 50 feet
• Inside width of 0.452 inches and inside length of 1.22 inches per link for hook and shackle compatibility reference
• Approximately 0.65 pounds per foot for load and weight estimation

Compatibility

Designed as a standard Grade 30 proof coil chain compatible with general-purpose hooks, shackles, grab hooks, and slip hooks sized for 1/4 inch chain. Confirm inside link dimensions against hardware specifications before ordering.

Installation Notes

Chain cutting should be performed with a angle grinder or bolt cutter rated for the chain diameter. Inspect all connecting hardware — hooks, shackles, and links — for matching working load ratings before assembling a chain assembly. Never exceed the stated working load limit, and never use proof coil chain as a lifting sling for overhead crane or hoist applications without confirming the appropriate grade and overhead-rated hardware per ASME B30 standards. Discard any chain with bent, stretched, cracked, or corroded links.