Value Collection TSPTFE018703150 Ptfe Tube 1/8 in Id

Product Description

The VALUE COLLECTION TSPTFE018703150 is a natural white PTFE (polytetrafluoroethylene) tube used in fluid transfer, pneumatic, and chemical handling applications across plumbing, HVAC, and industrial service work. With an inside diameter of 1/8 inch and an outside diameter of 3/16 inch, the wall thickness measures 0.030 inch (1/32 inch). PTFE material provides excellent chemical resistance and a low-friction bore, making this tube suitable for lines carrying corrosive fluids, refrigerants, or compressed air. It is sold in 1-foot increments with a 10-foot minimum cut length and comes on a 50-foot coil. Licensed tradespeople and industrial maintenance technicians are the primary installers.

This PTFE tube is suited for residential and commercial applications where a lightweight, chemically inert, small-bore tube is required. Typical uses include instrument tubing, pilot lines, chemical feed lines, and low-pressure pneumatic signal runs. Its natural white color and consistent wall thickness make it easy to inspect for wear or contamination during routine service. The 50-foot coil format reduces waste on jobs requiring multiple short runs cut to length in the field.

Key Features

• PTFE material provides broad chemical resistance and a low-friction inner bore
• 1/8 inch inside diameter and 3/16 inch outside diameter with a 0.030 inch wall thickness
• Natural white color allows visual inspection of tube condition
• Sold in 1-foot increments with a 10-foot minimum cut length
• 50-foot standard coil length minimizes splicing on longer runs
• Shore hardness of 60 provides flexibility without kinking under normal routing

Compatibility

Designed for use in small-bore fluid transfer, pneumatic signal, and chemical handling lines where a 1/8 inch ID PTFE tube is specified.

Installation Notes

Installation is typically performed by licensed plumbers, HVAC technicians, or instrumentation technicians. Before cutting or connecting, shut off the fluid or gas supply and relieve any line pressure. Use a sharp tube cutter or razor blade to achieve a clean, square cut end that seats properly in fittings. Confirm that all fittings and clamps used are rated for PTFE tubing and are compatible with the media being conveyed.