Value Collection SWC0660HS Double Angle Milling Cutter

Product Description

The VALUE COLLECTION SWC0660HS is a double angle milling cutter designed for forming symmetrical V-grooves, serrations, and chamfers on milling machines. It features a 60-degree included angle, a 3/4-inch cutting diameter, and a 3/16-inch cutting width. The cutter is ground from high speed steel and left uncoated, making it suitable for general-purpose milling applications where regrinding is common. The 3/8-inch straight shank provides a positive, secure mount in standard collet chucks and milling machine spindles. Overall length is 2-3/8 inches. Machinists, tool and die workers, and metalworking shops installing or maintaining fixtures and components will find this cutter fits into standard milling setups without adapter hardware.

This cutter is used in vertical and horizontal milling machine applications where double-angle profiles must be cut in a single pass. Typical applications include cutting dovetail-adjacent geometry, V-grooves for alignment features, and chamfer profiles on ferrous and non-ferrous workpieces. The bright, uncoated finish makes it easy to inspect the cutting edges and supports resharpening. It is suited for light-to-moderate production runs and prototype work in job shop environments.

Key Features

• 60-degree included angle for symmetrical double-angle cuts in one pass
• 3/4-inch cutting diameter with 3/16-inch cutting width for narrow, precise profiles
• High speed steel construction supports regrinding and resharpening
• Bright, uncoated finish allows easy edge inspection and is compatible with a wide range of cutting fluids
• 3/8-inch shank diameter fits standard collet chucks without adapters
• Compact 2-3/8-inch overall length reduces overhang in the spindle

Compatibility

Designed as a standard shank-mount double angle milling cutter for use in vertical and horizontal milling machines accepting a 3/8-inch straight shank collet or chuck.

Installation Notes

Installation is performed by a machinist or toolroom technician. Power down and lock out the milling machine before mounting or removing the cutter. Seat the shank fully in the collet or chuck and torque the drawbar or collet nut according to the machine manufacturer's specifications. Inspect cutting edges for chips or damage before each use, and apply an appropriate cutting fluid for the workpiece material.